- Feb 19, 2014
- 3
- 0
- 4,510
Hi,
I've been OCing my 8150 and hit 5ghz but was very unstable. I've backed off and am running @ 4.9ghz. If anyone has any suggestions for help stabilizing it would be greatly appreciated.
MB: m5a99fx pro r2.0
CPU: fx-8150
Cooler: H80i
Ram corsair vengeance 2x8gb (rated for 1866)
GPU: Radeon HD 6970
PSU: ABT-1050MM
Windows 7 professional
CPU ratio: 21.5
Turbo core tech: off
CPU bus freq: 228
Mem freq 1215mhz
CPU/nb freq 2508mhz
Ht link speed 2964mhz
Spread spectrum, power saving, cool and quiet, etc: off
Dram primary timings 9-9-9-24
CPU voltage 1.481250
CPU/nb voltage 1.20000
Dram 1.500000
Everything else is set to auto I believe.
I changed my digi+ power control settings to the max with power phase control at extreme.
I have been getting the BSOD 1E but upping my CPU voltage by the smallest increment possible results in a windows not booting successfully
My temps are around 45C idle or below ( which I'm happy with; it keeps the fans quiet)
Any help at all would be appreciated. I would like to be able to run prime 95 for about an hour (I'm not ultra conservative when it comes to stability)
I've been OCing my 8150 and hit 5ghz but was very unstable. I've backed off and am running @ 4.9ghz. If anyone has any suggestions for help stabilizing it would be greatly appreciated.
MB: m5a99fx pro r2.0
CPU: fx-8150
Cooler: H80i
Ram corsair vengeance 2x8gb (rated for 1866)
GPU: Radeon HD 6970
PSU: ABT-1050MM
Windows 7 professional
CPU ratio: 21.5
Turbo core tech: off
CPU bus freq: 228
Mem freq 1215mhz
CPU/nb freq 2508mhz
Ht link speed 2964mhz
Spread spectrum, power saving, cool and quiet, etc: off
Dram primary timings 9-9-9-24
CPU voltage 1.481250
CPU/nb voltage 1.20000
Dram 1.500000
Everything else is set to auto I believe.
I changed my digi+ power control settings to the max with power phase control at extreme.
I have been getting the BSOD 1E but upping my CPU voltage by the smallest increment possible results in a windows not booting successfully
My temps are around 45C idle or below ( which I'm happy with; it keeps the fans quiet)
Any help at all would be appreciated. I would like to be able to run prime 95 for about an hour (I'm not ultra conservative when it comes to stability)
Facebook
Twitter
Instagram