Hello - I seem to be flying into a cloud of rocks during my OSX install ...
Here is the system:
i73930k CPU
Asus Sabertooth X79
Evga GeForce GTX780 Ti
32gb corsair vengeance
Ocz 240gb SSD
Motherboard bios has been flashed to the latest version and the bios has been set to the recommended settings for a hackintosh install. Also just as an FYI all the hardware posts as it should ... I'm stumped...
I have tried every combination of settings for the multibeast OSX installer
Npci=0x2000 and 3000
GraphicsEnabler on and off
PCIRootUID=0 and 1
CPUs=1 -v and without loading drivers -x
Pretty much every iteration of those 4 settings...
I should mention it seems to break after all the verbos echoed startup gets to the Apple Ethernet load and the screen blanks out to go to the installer ( which I have yet to see ) - it goes black and then no signal ...
Anyone have this build and more success than I am having?
Any suggestions would be really appreciated ....
Thank you!
Here is the system:
i73930k CPU
Asus Sabertooth X79
Evga GeForce GTX780 Ti
32gb corsair vengeance
Ocz 240gb SSD
Motherboard bios has been flashed to the latest version and the bios has been set to the recommended settings for a hackintosh install. Also just as an FYI all the hardware posts as it should ... I'm stumped...
I have tried every combination of settings for the multibeast OSX installer
Npci=0x2000 and 3000
GraphicsEnabler on and off
PCIRootUID=0 and 1
CPUs=1 -v and without loading drivers -x
Pretty much every iteration of those 4 settings...
I should mention it seems to break after all the verbos echoed startup gets to the Apple Ethernet load and the screen blanks out to go to the installer ( which I have yet to see ) - it goes black and then no signal ...
Anyone have this build and more success than I am having?
Any suggestions would be really appreciated ....
Thank you!