Choosing good looking cooling setup for stryker!

mistercarlos7

Honorable
Feb 21, 2013
29
0
10,530
http://www.pureoverclock.com/wp-content/uploads/2012/09/Build-Full-View.jpg
I have the following case, and I have a guy building the whole thing for me for 20 bucks. He said he can build anything I bring him, he has done water cooling before as well. I just need to know what pieces I would have to buy to get something like this? What is the total cost overall? My setup is here if you want to see it.
PCPartPicker part list: http://pcpartpicker.com/p/2Xobh
Ignore the CPU cooler set there!
I want it to look as similar as possible to the one in the picture linked above.
Thank you for your time.

Please list the parts that I would need and please if you could keep it as low as possible in terms of money.

PCPartPicker part list: http://pcpartpicker.com/p/2Xobh
 
Rad, Pump, Res and CPU block
http://www.frozencpu.com/products/16070/ex-wat-210/XSPC_Raystorm_EX240_Extreme_Universal_CPU_Water_Cooling_Kit_w_D5_Variant_Pump_Included_and_Free_Dead-Water.html?id=8Y8K7C2X

GPU Block. Order the GPU first, check version number and make sure block fits
http://www.frozencpu.com/products/23352/ex-blc-1682/EK_Radeon_R9-280X_DCII_VGA_Liquid_Cooling_Block_-_Acetal_Nickel_EK-FC_R9-280X_DCII_-_AcetalNickel.html?tl=g30c309s2072

It's hard to tell from the pic if he is using compression fittings or barbs. IF you wanna keep cost down then go with barbs for 1/2 inch tubing.