Is this big enough????

ajumal

Reputable
Feb 24, 2014
9
0
4,510
im trying to find out if my current casing will be big enough to support my in the near future gaming rig

the casing is emachines ET Series / ET1861(im a noob but the casing looks like this and pretty sure its the same size)

here is my build im thinking of having
MSI B75 GAMING motherboard
DDR3 2x4gb ram
intel Core™ i3
FX AMD Radeon HD 7870 2gb grapich card
XFX 550W psu

soooo will all this fit.......
 
Solution
It's in Chinese but it has the case dimensions.

http://www.mcplive.cn/?controller=Article&id=6144&page=2

361mm × 411mm × 180mm = 14.2" x 16.18" x 7.08"

From further searching, the motherboard is a ATX but it appears to be a micro ATX. That being said, you won't be able to use the B75 Gaming because it's not a micro.

Honestly, get a new case. That case doesn't have good air flow. All of your parts will run warm/hot. You also may have trouble with after market coolers if you want the CPU to run cooler.
Since i can't find a decent pic of that case either, just do your own measurements of the case, and then look up the measurements of the components. it looks like the motherboard will fit, but i can't tell from the pictures if it supports that big of a gpu or psu
 

barto

Expert
Ambassador
It's in Chinese but it has the case dimensions.

http://www.mcplive.cn/?controller=Article&id=6144&page=2

361mm × 411mm × 180mm = 14.2" x 16.18" x 7.08"

From further searching, the motherboard is a ATX but it appears to be a micro ATX. That being said, you won't be able to use the B75 Gaming because it's not a micro.

Honestly, get a new case. That case doesn't have good air flow. All of your parts will run warm/hot. You also may have trouble with after market coolers if you want the CPU to run cooler.
 
Solution

ajumal

Reputable
Feb 24, 2014
9
0
4,510


soooo i should buy a towercase will u show me the way