New Computer, New Computer Builder, Booting Issues...

XSweetFreedomX

Honorable
Dec 1, 2013
8
0
10,510
I am new to building computers and am currently attempting to build a gaming computer, I've done quite a bit of research and have ordered all of my components. I started putting it together today and all seemed to be going well until I came to the power supply. First we plugged the CPU into the motherboard followed by the heatsink/fan. Then plugged our two memory sticks into the corresponding blue slots. Next we mounted our motherboard and then were advised to attempt a boot at this point to see if everything was ok so far. My basic problem right now is the CPU fan will not spin and there is no display on the monitor. The only way I know power is being given at all is by the three LED lights on my motherboard. There was quite a bit of confusion when we began plugging in the PSU. We are using a XFX Core Edition PRO750W (P1-750S-NLB9) 750W ATX12V 2.2 & ESP12V 2.91 SLI Ready CrossFire Ready 80 PLUS BRONZE Certified Active PFC Power Supply. I found and plugged in my PSU to the 24 pin connector, however when it came to the 8 (or 4?) pin connector near the CPU I believe I have hit a wall on my comprehension. My motherboard is a ASUS P8Z77-V LK LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS that has two 4 pin connectors near the CPU (labeled by these connectors is EATX12v). My PSU pins match the first four connectors just fine (square pin, circularish pin, square pin, circularlish pin), however the other four pins on my motherboard continue in the same fashion, square, circle, square circle. The other four pins on my PSU do not, they are all the circularish pin. This allows me to only connect my PSU to four of the eight possible connector pins on my motherboard (If I am going only by an exact pin match). So this power supply to motherboard scenario has me a bit flustered. Is it ok to only have four out of the eight plugged in with an EATX12v? The 24 pin went in just fine. Could this be the reason I can't boot and the fan won't run? All of these confusions have me calling it a night, and hoping for answers. :banghead: Thanks for any help I can get. Below is the entirety of my hopeful build.


CPU: Intel Core i7-3770 Ivy Bridge 3.4GHz (3.9GHz Turbo) LGA 1155 77W Quad-Core Desktop Processor Intel HD Graphics 4000 BX80637I73770

Motherboard: ASUS P8Z77-V LK LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS

Memory: Mushkin Enhanced Redline 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model 996981

Storage: Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive

Video Card: EVGA 02G-P4-2663-KR GeForce GTX 660 FTW Signature 2 2GB 192-bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card

Case: Corsair 200R ATX Mid Tower Case

Power Supply: XFX Core Edition PRO750W (P1-750S-NLB9) 750W ATX12V 2.2 & ESP12V 2.91 SLI Ready CrossFire Ready 80 PLUS BRONZE Certified Active PFC Power Supply

Optical Drive: Samsung SH-224DB/BEBE DVD/CD Writer
 
Solution
http://www.tomshardware.co.uk/answers/id-1631485/motherboard-pin-eps-pin-eps-connector-power.html

Reading that tells me you shouldn't need more than 1x 4-pin connector. Supposed to provide 144 Watts while your CPU only draws 77 W (if its TDP, maybe add 25% more).

My brother just built a computer and forgot to connect the 4-pin (AMD-build) but the CPU-fan was still spinning so the question is, is your CPU-fan broken? Did you connect it to the CPU_Fan on the motherboard?

Did you also connect the 6-pin PCI-E connector to the graphics card?

And yes, sometimes it is better to sleep on it. Fresh day, fresh mind.

mamasan2000

Distinguished
BANNED
http://www.tomshardware.co.uk/answers/id-1631485/motherboard-pin-eps-pin-eps-connector-power.html

Reading that tells me you shouldn't need more than 1x 4-pin connector. Supposed to provide 144 Watts while your CPU only draws 77 W (if its TDP, maybe add 25% more).

My brother just built a computer and forgot to connect the 4-pin (AMD-build) but the CPU-fan was still spinning so the question is, is your CPU-fan broken? Did you connect it to the CPU_Fan on the motherboard?

Did you also connect the 6-pin PCI-E connector to the graphics card?

And yes, sometimes it is better to sleep on it. Fresh day, fresh mind.
 
Solution

XSweetFreedomX

Honorable
Dec 1, 2013
8
0
10,510
So Calvin says don't worry about the shape of the pins and to connect the 4+4, mamasan says 1x4 should work. In response to mamasan, I don't see how the fan could be broken, I handled it like a nuclear weapon from box to install (anti-static precautions and everything). The fan is plugged into the CPU_Fan connector. I have not even installed the graphics card yet at I was told it was best to install memory/cpu/heatsink/fan first and try to boot the bios. My memOK light on my motherboard is solid red fyi and holding the button does not initiate a flashing red led indicating a memory sink, just an fyi.
 

XSweetFreedomX

Honorable
Dec 1, 2013
8
0
10,510
Ok so I've partially answered the bulk of my question, they can close this one, as I simply remounted most of the components to get the fans running. I will post an updated thread with my current and fully detailed issue.