Will an NZXT H440 support two XSPC AX 360s with dual-fan config?

Toggle sidebar Toggle sidebar
Nuclear101

Nuclear101

Honorable
Jun 11, 2012
1,532
0
12,460
Hi,

I need to know if you can mount dual XSPC AX-360 radiators with push-pull fan configurations (6x Corsair SP 120 High-Performance Editions per radiator) in an NZXT H440.

Thanks in advance,

Nuclear101
 
Solution
veladem
Taking a second look, if you remove all the front drive cads you would be able to fit your 360 BUT where would you put your HDD?

That is assuming of course that you have a 3.5" HDD, if you only have a SSD then you could mount that at the floor drive mounts and run the 360 rad just fine.

Above the PSU of course can still be 2xSSD's also.

If you have 90 degree in/out fitting that might even make things easier, but probably not needed if you have just the 45's
Sort by date Sort by votes
veladem

veladem

Honorable
Sep 6, 2012
1,151
0
11,660
[strike]Eeek, looking at the dimensions, I don't think the AX-360 will mount in front unless you made some mods to the top bay OR put the rad on the outside, I'm by far no expert, just going by dimensions.[/strike]

Looks like 4.5" roughly for the rad and such at the front.
 
Upvote 0 Downvote
veladem

veladem

Honorable
Sep 6, 2012
1,151
0
11,660
Taking a second look, if you remove all the front drive cads you would be able to fit your 360 BUT where would you put your HDD?

That is assuming of course that you have a 3.5" HDD, if you only have a SSD then you could mount that at the floor drive mounts and run the 360 rad just fine.

Above the PSU of course can still be 2xSSD's also.

If you have 90 degree in/out fitting that might even make things easier, but probably not needed if you have just the 45's
 
Upvote 0 Downvote
Solution
S

Simsreaper

Reputable
Mar 10, 2014
26
0
4,540
No, not 2. The top rad can be a 360, however it must be a slim form factor. I am in the process of a build around the H440, and through the forums have found that the top rad will only be able to support a 30 mm rad with one set of fans. Of course, you could always mod the case, but stock... sorry, no go
 
Upvote 0 Downvote
M

Mortiwrath

Reputable
Mar 9, 2014
15
0
4,520
I just installed a loop on my H440 and Simsreaper is correct. XSPC EX360 Slim Radiator and 3 SP120 was what I went with and its pretty tight http://i.imgur.com/raj7alb.jpg, the white lines are the sp120 fans.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom