Beyond Frustrated... 8 year old computer, having issues with Blu-Rays!! Video Card?
Tags:
-
Graphics
- Computers
-
Graphics Cards
- Powerdvd
Last response: in Graphics & Displays
legend1011
February 25, 2014 10:31:33 AM
Hello,
I've been messing around with Cyberlink PowerDVD 13 and a 3D version of Avatar on Blu-Ray Disc. I cannot get it to play on my computer at all!! I keep receiving a "0012" error in PowerDVD which claims my Video Card isn't sufficient (My Video card is a ATI AMD X1900XTX 512MB). Perhaps, my card is really a dinosaur, but I don't think I should need that much hardware for blue-ray video playback? I have tried updating the Video Card to the latest driver and still no luck.
What am I missing?
I appreciate any help. Thank You
I've been messing around with Cyberlink PowerDVD 13 and a 3D version of Avatar on Blu-Ray Disc. I cannot get it to play on my computer at all!! I keep receiving a "0012" error in PowerDVD which claims my Video Card isn't sufficient (My Video card is a ATI AMD X1900XTX 512MB). Perhaps, my card is really a dinosaur, but I don't think I should need that much hardware for blue-ray video playback? I have tried updating the Video Card to the latest driver and still no luck.
What am I missing?
I appreciate any help. Thank You
More about : frustrated year computer issues blu rays video card
legend1011
February 25, 2014 10:33:15 AM
Also, this is the first time I am setting up this HTPC as a Blu-Ray player. Just installed the Blu-Ray drive, PowerDVD Software. Video card is hooked up to a 3D LG TV (47LM4600) through DVI-HDMI adapter (the TV doesn't have an DVI and the Video card only has DVI; it is my understanding that this is perfectly fine and 100% digital signal). Thanks
m
0
l
Check your specs..
If I recall.. the player will not play if it does not detect adequate security along the route.. all the way to screen
(PC I tried it on would play to my digital screen by refused to play to an analogue) and on checking - specs said it needed some sort of compliant devices (cant recall details).
Its an anti-piracy feature - to make sure you are not pumping It out to a video recorder or DVD writer I guess.
Anyway.. .check the spec needs of the software and check all hardware complies.
Perhaps someone else can fill in the blanks.
HTH
Cheers
If I recall.. the player will not play if it does not detect adequate security along the route.. all the way to screen
(PC I tried it on would play to my digital screen by refused to play to an analogue) and on checking - specs said it needed some sort of compliant devices (cant recall details).
Its an anti-piracy feature - to make sure you are not pumping It out to a video recorder or DVD writer I guess.
Anyway.. .check the spec needs of the software and check all hardware complies.
Perhaps someone else can fill in the blanks.
HTH
Cheers
m
0
l
Related resources
- What's a good new video card for a 5 year old computer? ($100-$200 USD range) - Forum
- About to get a new AGP video card for a 3 year old computer. - Forum
I suggest looking at this link at Cyberlink:
http://www.cyberlink.com/support/product-faq-content.do...
And here:
http://www.cyberlink.com/support/product-faq-content.do...
Your x1900 should work, you may just need to update your video drivers.
Please note this from the second link: If you want to use digital output during Blu-ray/Blu-ray 3D Disc and TrueTheater 3D playback (through DVI or HDMI connection), make sure the graphics card is HDCP (High-bandwidth Digital Content Protection) compatible. If your graphics card is not HDCP-compliant but with a DVI connector, you can use a DVI-to-VGA converter (or cable) to output the video in analog format. To determine whether your graphics card is HDCP-compliant, please visit the hardware manufacturer's Web site.
http://www.cyberlink.com/support/product-faq-content.do...
And here:
http://www.cyberlink.com/support/product-faq-content.do...
Your x1900 should work, you may just need to update your video drivers.
Please note this from the second link: If you want to use digital output during Blu-ray/Blu-ray 3D Disc and TrueTheater 3D playback (through DVI or HDMI connection), make sure the graphics card is HDCP (High-bandwidth Digital Content Protection) compatible. If your graphics card is not HDCP-compliant but with a DVI connector, you can use a DVI-to-VGA converter (or cable) to output the video in analog format. To determine whether your graphics card is HDCP-compliant, please visit the hardware manufacturer's Web site.
m
0
l
Your video card is not supported. Not that it is insufficient, maybe they just didn't bother testing anything prior to HD5000 series so the software simply refuses to try. Your best bet would be to either run a previous version of the software which still supports your VGA, try a different software that does or purchase some cheap VGA for that purpose.
As for the above post, I don't know which version of powerdvd those specs are for, that FAQ is likely outdated. If you go to PDVD 13 page and link to specs, it will report a HD 5000 series as minimum.
http://www.cyberlink.com/products/powerdvd-pro/spec_en_...
As for the above post, I don't know which version of powerdvd those specs are for, that FAQ is likely outdated. If you go to PDVD 13 page and link to specs, it will report a HD 5000 series as minimum.
http://www.cyberlink.com/products/powerdvd-pro/spec_en_...
m
0
l
From Cyberlink (for Blu-ray disc and TrueTheater 3D playback):
ATI:
Minimum: ATI Radeon X1600 series, X1800 series, X1900 series
Recommended: ATI Radeon HD 2400 series, 2600 series, 2900 series, 3300 series, 3400 series, 3600 series, 3800 series, 4500 serids, 4600 series, 4800 series, FireGL V3750, FireGL V5700, FireGL V7750, and FireGL V8700.
ATI:
Minimum: ATI Radeon X1600 series, X1800 series, X1900 series
Recommended: ATI Radeon HD 2400 series, 2600 series, 2900 series, 3300 series, 3400 series, 3600 series, 3800 series, 4500 serids, 4600 series, 4800 series, FireGL V3750, FireGL V5700, FireGL V7750, and FireGL V8700.
m
0
l
COLGeek said:
From Cyberlink (for Blu-ray disc and TrueTheater 3D playback):ATI:
Minimum: ATI Radeon X1600 series, X1800 series, X1900 series
Recommended: ATI Radeon HD 2400 series, 2600 series, 2900 series, 3300 series, 3400 series, 3600 series, 3800 series, 4500 serids, 4600 series, 4800 series, FireGL V3750, FireGL V5700, FireGL V7750, and FireGL V8700.
I understand that came from the FAQ, which I believe is outdated as they list different hardware requirements on their products' specs page.
m
0
l
legend1011
February 25, 2014 11:17:25 AM
after more troubleshooting, it appears that my connection is listed as : "Digital (without HDCP)". I'm not sure if it is an issue with my Graphics Card being HDCP compliant or the fact I have a DVI-to-HDMI which might be flagging it as well. I found a website debating whether or not my card is actually "HDCP compliant" : http://forums.penny-arcade.com/discussion/13031/status-... . I think I will try the VGA route first since it is cheapest. Wouldn't the quality of the movie sufffer? I'm thinking I probably should bite the bullet and upgrae the video card to something that is HDCP compliant. Any inexpensive suggestions? My X1900XTX card is PCI-Express X16 (don't even think it's 2.0). Thanks
m
0
l
Best solution
legend1011 said:
after more troubleshooting, it appears that my connection is listed as : "Digital (without HDCP)". I'm not sure if it is an issue with my Graphics Card being HDCP compliant or the fact I have a DVI-to-HDMI which might be flagging it as well. I found a website debating whether or not my card is actually "HDCP compliant" : http://forums.penny-arcade.com/discussion/13031/status-... . I think I will try the VGA route first since it is cheapest. Wouldn't the quality of the movie sufffer? I'm thinking I probably should bite the bullet and upgrae the video card to something that is HDCP compliant. Any inexpensive suggestions? My X1900XTX card is PCI-Express X16 (don't even think it's 2.0). ThanksVGA connection is not HDCP compliant. Your card is, though, through the HDMI or DVI connector. The problem is, when your card launched, HDCP was at revision 1.3. Back in 2009 we reached revision 2.0, which I don't think is backwards compatible. That is likely the reason you can't get a HDCP enabled link out of it. If the card is solely for Blu-Ray, a GT 610 would do the trick under 50 bucks (american simoleons).
Don't worry about the PCI-E, that one is backwards compatible, and for this purpose, there is no loss in using v1.0.
Also, the more usual way of going around HDCP is using a component connection. If you card has one, maybe it will work.
Share
legend1011
February 25, 2014 12:38:40 PM
Murissokah said:
legend1011 said:
after more troubleshooting, it appears that my connection is listed as : "Digital (without HDCP)". I'm not sure if it is an issue with my Graphics Card being HDCP compliant or the fact I have a DVI-to-HDMI which might be flagging it as well. I found a website debating whether or not my card is actually "HDCP compliant" : http://forums.penny-arcade.com/discussion/13031/status-... . I think I will try the VGA route first since it is cheapest. Wouldn't the quality of the movie sufffer? I'm thinking I probably should bite the bullet and upgrae the video card to something that is HDCP compliant. Any inexpensive suggestions? My X1900XTX card is PCI-Express X16 (don't even think it's 2.0). ThanksVGA connection is not HDCP compliant. Your card is, though, through the HDMI or DVI connector. The problem is, when your card launched, HDCP was at revision 1.3. Back in 2009 we reached revision 2.0, which I don't think is backwards compatible. That is likely the reason you can't get a HDCP enabled link out of it. If the card is solely for Blu-Ray, a GT 610 would do the trick under 50 bucks (american simoleons).
Don't worry about the PCI-E, that one is backwards compatible, and for this purpose, there is no loss in using v1.0.
Also, the more usual way of going around HDCP is using a component connection. If you card has one, maybe it will work.
Now silly question. My old card (X1900XTX) was 512MB, 256-bit GDDR3 and the one your recommended (GT 610) is a 1 (or 2) GB, at 64-bit GDDR3. I realize your card is newer technology (PCI Express 2.0, HDCP compliance, etc...) but would you consider this card to be an upgrade, downgrade, or equivalent in performance of my current one (basically, will it play my games the same way I am playing them). If so, I will just move the X1900XTX to another machine. just curious what the difference is between 64-bit/256-bit and if it will impact my gaming (i play older games, nothing serious).
Thanks again for your help
m
0
l
legend1011 said:
Murissokah said:
legend1011 said:
after more troubleshooting, it appears that my connection is listed as : "Digital (without HDCP)". I'm not sure if it is an issue with my Graphics Card being HDCP compliant or the fact I have a DVI-to-HDMI which might be flagging it as well. I found a website debating whether or not my card is actually "HDCP compliant" : http://forums.penny-arcade.com/discussion/13031/status-... . I think I will try the VGA route first since it is cheapest. Wouldn't the quality of the movie sufffer? I'm thinking I probably should bite the bullet and upgrae the video card to something that is HDCP compliant. Any inexpensive suggestions? My X1900XTX card is PCI-Express X16 (don't even think it's 2.0). ThanksVGA connection is not HDCP compliant. Your card is, though, through the HDMI or DVI connector. The problem is, when your card launched, HDCP was at revision 1.3. Back in 2009 we reached revision 2.0, which I don't think is backwards compatible. That is likely the reason you can't get a HDCP enabled link out of it. If the card is solely for Blu-Ray, a GT 610 would do the trick under 50 bucks (american simoleons).
Don't worry about the PCI-E, that one is backwards compatible, and for this purpose, there is no loss in using v1.0.
Also, the more usual way of going around HDCP is using a component connection. If you card has one, maybe it will work.
Now silly question. My old card (X1900XTX) was 512MB, 256-bit GDDR3 and the one your recommended (GT 610) is a 1 (or 2) GB, at 64-bit GDDR3. I realize your card is newer technology (PCI Express 2.0, HDCP compliance, etc...) but would you consider this card to be an upgrade, downgrade, or equivalent in performance of my current one (basically, will it play my games the same way I am playing them). If so, I will just move the X1900XTX to another machine. just curious what the difference is between 64-bit/256-bit and if it will impact my gaming (i play older games, nothing serious).
Thanks again for your help
The GT610 is an entry level card, with near-zero gaming capability. The X1900XTX is a top tier gaming card, although an elder nowadays. You won't find a comparison due to the generation gap, but it should be a significant downgrade. As I had stated before, the 610 is a suggestion for a low cost fix to your situation.
m
0
l
legend1011
February 26, 2014 3:06:26 PM
Murissokah said:
legend1011 said:
Murissokah said:
legend1011 said:
after more troubleshooting, it appears that my connection is listed as : "Digital (without HDCP)". I'm not sure if it is an issue with my Graphics Card being HDCP compliant or the fact I have a DVI-to-HDMI which might be flagging it as well. I found a website debating whether or not my card is actually "HDCP compliant" : http://forums.penny-arcade.com/discussion/13031/status-... . I think I will try the VGA route first since it is cheapest. Wouldn't the quality of the movie sufffer? I'm thinking I probably should bite the bullet and upgrae the video card to something that is HDCP compliant. Any inexpensive suggestions? My X1900XTX card is PCI-Express X16 (don't even think it's 2.0). ThanksVGA connection is not HDCP compliant. Your card is, though, through the HDMI or DVI connector. The problem is, when your card launched, HDCP was at revision 1.3. Back in 2009 we reached revision 2.0, which I don't think is backwards compatible. That is likely the reason you can't get a HDCP enabled link out of it. If the card is solely for Blu-Ray, a GT 610 would do the trick under 50 bucks (american simoleons).
Don't worry about the PCI-E, that one is backwards compatible, and for this purpose, there is no loss in using v1.0.
Also, the more usual way of going around HDCP is using a component connection. If you card has one, maybe it will work.
Now silly question. My old card (X1900XTX) was 512MB, 256-bit GDDR3 and the one your recommended (GT 610) is a 1 (or 2) GB, at 64-bit GDDR3. I realize your card is newer technology (PCI Express 2.0, HDCP compliance, etc...) but would you consider this card to be an upgrade, downgrade, or equivalent in performance of my current one (basically, will it play my games the same way I am playing them). If so, I will just move the X1900XTX to another machine. just curious what the difference is between 64-bit/256-bit and if it will impact my gaming (i play older games, nothing serious).
Thanks again for your help
The GT610 is an entry level card, with near-zero gaming capability. The X1900XTX is a top tier gaming card, although an elder nowadays. You won't find a comparison due to the generation gap, but it should be a significant downgrade. As I had stated before, the 610 is a suggestion for a low cost fix to your situation.
Fair enough... I'm starting to think it's time for a new machine, but if I can skimp by another year I'd be happier.
By the way, my system specs are as follows. I built the entire machine in September 2006
CPU: E6600 Core 2 Duo Processor
Motherboard: Asus P5W DH Deluxe
Ram: 2 1GB sticks of G Skill Gaming Ram (Total 2GB)
PSU: Seasonic S12 750? watt
m
0
l
Read discussions in other Graphics & Displays categories
!