Sign in with
Sign up | Sign in
Your question
Solved

Corsair H100i Fan control issue

Last response: in Systems
Share
February 25, 2014 3:18:51 PM

I have a Corsair H100i and they SP120s run at full speed and are ridiculously loud. Can I change the fan speed because SpeedFan and Corsair link wont change it.
a c 101 à CPUs
February 25, 2014 3:21:10 PM

If they are plugged into the proper ports on your motherboard it should control them properly.
m
0
l
a c 125 à CPUs
February 25, 2014 3:23:08 PM

Corsair link should control them as long as they are connected to the pump it self.

If it does not, I would contact corsair to see if they have a firmware update OR use the motherboard to control them as the above user recommends.
m
0
l
Related resources
February 25, 2014 3:25:57 PM

nukemaster said:
Corsair link should control them as long as they are connected to the pump it self.

If it does not, I would contact corsair to see if they have a firmware update OR use the motherboard to control them as the above user recommends.


They're plugged into the pump with the splitter, but corsair link still doesn't work.
m
0
l
a c 101 à CPUs
February 25, 2014 3:37:40 PM

And Corsair link is installed on your pc and detects the H100 properly?
m
0
l
a c 125 à CPUs
February 25, 2014 3:38:18 PM

Very strange. Any chance you just need an update or something. I used an H80i and set a curve in link it took right away(never needed to run the software again after either).
m
0
l
February 25, 2014 4:25:12 PM

getochkn said:
If they are plugged into the proper ports on your motherboard it should control them properly.


getochkn said:
And Corsair link is installed on your pc and detects the H100 properly?


It used to, but it doesn't anymore...
m
0
l
February 25, 2014 4:27:05 PM

nukemaster said:
Very strange. Any chance you just need an update or something. I used an H80i and set a curve in link it took right away(never needed to run the software again after either).


Everything is updated, still nothing.
m
0
l
a c 101 à CPUs
February 25, 2014 4:53:01 PM

Make sure the USB header is connected then still to the motherboard. If the software doesn't see it, then it can't control it.
m
0
l

Best solution

a c 125 à CPUs
February 25, 2014 6:13:01 PM

I think you may have to contact Corsair. It sounds like your unit has developed a defect.

In the meantime connect the fans to the motherboard to control them.
Share
!