Sign in with
Sign up | Sign in
Your question
Solved

How Should I Set up My fans??

Tags:
  • Fan
  • Systems
  • Cooler Master
Last response: in Systems
Share
February 26, 2014 2:54:07 AM

I have a Cooler Master K350 and it has a top back fan slot, a side window fan slot, a bottom fan slot and a front bottom fans slot. How should i set them up? Which should be intake and which should be exhaust?

More about : set fans

Best solution

February 26, 2014 3:20:07 AM

welt here is what i do with all the computers i build
the top and back fans- exhaust
and the side window intake so it hits your GPU if you have one

as for a bottom fan i never needed to use that slot so i would say after setting up the way i described try both intake and exhaust on the bottom to see which is better

also if your power supply unit has a fan make sure you face the fan down so it can dispel the warm air out the case

also to check your temps use speccy
http://www.filehippo.com/download_speccy

speccy will tell you all your temps for CPU, motherboard, hard drives, GPU as well as much more
of course that's if u need a temp checker

let me know if that works for you
Share
February 26, 2014 3:52:14 AM

Hi
The normal method is rear and top exhaust,front,side and bottom intake.
m
0
l
Related resources
February 26, 2014 3:32:54 PM

makkem said:
Hi
The normal method is rear and top exhaust,front,side and bottom intake.

The thing is i dont have a top slot, it is only a vent no place to put a fan. The rest have the rest of the slots.
m
0
l
February 26, 2014 3:34:58 PM

You only need two or three fans at at most. For your case, set the front to intake and the rear to exhaust. That will be plenty.
m
0
l
!