Sign in with
Sign up | Sign in
Your question
Solved

CPU and RAM Support help

Last response: in Motherboards
Share
February 26, 2014 11:42:39 PM

I have found a HCL for ASRock FM2A55M-VG3+ but don't see the AMD A6-5400K CPU or G-Skill RIPJaw RAM listed on the support list
RAM:
http://www.newegg.com/Product/Product.aspx?Item=N82E168...
CPU:
http://www.newegg.com/Product/Product.aspx?Item=N82E168...

does anyone know if these items will work. the motherboard will be upgraded a little bit down the road this is just going to be a cheap build till I'm done with college and have more money to spend


More about : cpu ram support

Best solution

a c 389 à CPUs
a b V Motherboard
February 26, 2014 11:54:32 PM

It will work.
Share
February 27, 2014 12:01:17 AM

ewok93 said:
It will work.


ok thanks another question do you know what I could OC that CPU to and still be stable? it says turbo is 3.8 but I assume it can be overclocked higher than that
m
0
l
Related resources
a c 389 à CPUs
a b V Motherboard
February 27, 2014 12:03:00 AM

That depends on ventilation, air flow, dust level, ambient room temperature, thermal paste application, the material of your case, etc. I cannot give you an accurate estimate without knowing your maximum temps under load with Prime95.
m
0
l
February 27, 2014 12:05:55 AM

ewok93 said:
That depends on ventilation, air flow, dust level, ambient room temperature, thermal paste application, the material of your case, etc. I cannot give you an accurate estimate without knowing your maximum temps under load with Prime95.
don't have it together yet so I cant say what it will run at lol my house stays at about 65 Fahrenheit I have an 80mm exhaust fan and I will be using the Corsair CX500 power supply which has a 120mm fan. I have room in the front for another 80mm fan but was told that that could cause air flow problems . and I plan on pulling it out to dust atleast 1-2 times a month just to be safe

m
0
l
a c 389 à CPUs
a b V Motherboard
February 27, 2014 12:09:43 AM

I don't see any possible scenario in which adding another fan could cause problems with airflow. Add that second fan, because I don't think you'll get good temperatures on stock with only one 80mm fan.
m
0
l
February 27, 2014 12:18:22 AM

ewok93 said:
I don't see any possible scenario in which adding another fan could cause problems with airflow. Add that second fan, because I don't think you'll get good temperatures on stock with only one 80mm fan.
I should add that I plan on adding a HDD cooler that will actually blow cold air into the case (I might have to make one since I want it to mount in the 3.5" slot
http://s1178.photobucket.com/user/dev993/library/Comput...
this is the case I plan on using I have the DVD drive and rear fan already I bought the PSU today

m
0
l
a c 389 à CPUs
a b V Motherboard
February 27, 2014 12:20:00 AM

Yeah you still need the other fan.
m
0
l
February 27, 2014 12:24:50 AM

ewok93 said:
Yeah you still need the other fan.


ok so in total I will have 6 fans. 1xCPU fan 1x120mm PSU fan 2x80mm fans 2x40mm fans (HDD cooler) I might go bigger with the HDD cooler fans
m
0
l
a c 389 à CPUs
a b V Motherboard
February 27, 2014 6:14:03 AM

The PSU fan doesn't do much, the CPU cooler is not a case fan, and 2 40mm fans will have half the airflow of one 80mm fan. You won't have a ton of airflow.
m
0
l
!