Sign in with
Sign up | Sign in
Your question
Solved

Can i fit a 212 evo in a Zalman T1 Micro ATX case?

Last response: in Components
Share
February 28, 2014 1:10:11 PM

Quick question... Basically what the title says :D 
February 28, 2014 2:19:32 PM

No, the cooler is 159mm and the max is 140mm.


"The height of the cooler must not exceed 140mm from the motherboard.
PSU should not exceed 140mm. "
m
0
l
March 1, 2014 10:32:06 AM

terry4536 said:
No, the cooler is 159mm and the max is 140mm.


"The height of the cooler must not exceed 140mm from the motherboard.
PSU should not exceed 140mm. "



though.... the dimensions are 348 x 169 x 425mm


anyways, any good cooler you'd recommend?

(Does the gigabyte 650 OC fit in this case?
188 x 131 x 42 mm)

(The dimensions for the Cooler state:
120 x 80 x 159)

Like, basing off those dimensions, it should fit though...
m
0
l

Best solution

March 1, 2014 12:27:06 PM

Xyloriuphon said:

though.... the dimensions are 348 x 169 x 425mm

With just a 92mm fan in the rear i would not go for the 212 evo.


Xyloriuphon said:

anyways, any good cooler you'd recommend?

With the ability to put a 120mm fan in the top you should be able to put a 120mm aio watercooler in the case like a cooler master seidon 120m,the corsair h55 or the h60 (2013 edition),but i'm not a 100% sure.
or for an air cooler,
Phanteks PH-TC14CS=height 140.5mm.
http://pcpartpicker.com/part/phanteks-cpu-cooler-phtc14...
use low profile ram with this one!


Xyloriuphon said:

(Does the gigabyte 650 OC fit in this case?
188 x 131 x 42 mm)


Yes,from the zalman site;"VGA Compatibility:Full Size(up to 270mm)".
Share
!