Sign in with
Sign up | Sign in
Your question
Solved

Plugging pump in PSU via molex?

Tags:
  • Components
Last response: in Components
Share
February 28, 2014 3:55:22 PM

Hi,

Is it possible to plug the pump from the Corsair H105 in to the PSU (HX750) via molex so it receives a constant 12 volts?

If so will it be like this: PSU 6 pin --> Molex (Female) --> Molex (Male) --> pump?

Thanks in advance!

More about : plugging pump psu molex

Best solution

February 28, 2014 4:09:06 PM

Sure, a molex to 4-pin adapter would allow you to do that. You would lose motherboard control of the pump though.
Share
February 28, 2014 6:49:40 PM

Not an ideal setup for control , but will work.
m
0
l
Related resources
March 1, 2014 8:41:02 AM

What would you suggest Blackbird? I want to keep it at a 100% all the time.
m
0
l
March 1, 2014 12:02:19 PM

If you want 100% go with it.
m
0
l
March 2, 2014 1:28:58 PM

SR-71 Blackbird said:
If you want 100% go with it.


I read that I can also connect the pump into the PWR_FAN port. Is this better and will it still run 100% all the time?
m
0
l
!