evga gtx 770 sc specs are 1111mhz core, 1163 boost.
Using Thor v2 case (2 intake and 2 exhaust fans)
60 degree Fahrenheit ambient temperature
using heaven benchmark maxed, furmark and precision x test function.
No overvolting
During heaven benchmark stock specs hover around 70C.
max only gpu clock gain is +57mhz (going higher either gives me 80+ temps or the card will just go back to stock specs even if temp is 60C or 70C)
max memory only clock gain +263 (going higher will produce 80+ temps or just make card revert to stock specs)
max combined clocks, +44mhz gpu, +175mhz memory.
Now from what everyone else has been getting this is low, some people get +120mhz gpu clock and +400 mhz core clock without overvolting but everyone else is getting a minimum of +70mhz gpu and +250mhz core clock. And they are staying in between 60-70C
Why is my threshold so low?
During furmark and precision x test function the card at stock (default) settings always gets to 80C and gpu boost 2.0 throttles it. This is what concerns me. From what I have read my factory specs should not be getting me into the throttle temperature range, especially with a good airflow case like the thor v2.
what could I be doing wrong/ and or be wrong with the card?
Using Thor v2 case (2 intake and 2 exhaust fans)
60 degree Fahrenheit ambient temperature
using heaven benchmark maxed, furmark and precision x test function.
No overvolting
During heaven benchmark stock specs hover around 70C.
max only gpu clock gain is +57mhz (going higher either gives me 80+ temps or the card will just go back to stock specs even if temp is 60C or 70C)
max memory only clock gain +263 (going higher will produce 80+ temps or just make card revert to stock specs)
max combined clocks, +44mhz gpu, +175mhz memory.
Now from what everyone else has been getting this is low, some people get +120mhz gpu clock and +400 mhz core clock without overvolting but everyone else is getting a minimum of +70mhz gpu and +250mhz core clock. And they are staying in between 60-70C
Why is my threshold so low?
During furmark and precision x test function the card at stock (default) settings always gets to 80C and gpu boost 2.0 throttles it. This is what concerns me. From what I have read my factory specs should not be getting me into the throttle temperature range, especially with a good airflow case like the thor v2.
what could I be doing wrong/ and or be wrong with the card?