i need help my ps3 will only connect to my tv via component cable.
- Thread starter prophetrm
- Start date
Spectre694
Dignified
- Feb 28, 2014
- 2,907
- 0
- 13,960
and still nothing
ThatVietGuy
Titan
- Nov 6, 2007
- 11,718
- 314
- 70,240
From Sony:
Reset the Video Output Settings
If you changed televisions or changed the type of cable you are using, you may need to reset the video output on the PS3. Perform the following steps to reset the Video Output Settings.
Before changing cables, make sure the PS3 is turned off and the power light is red.
Unplug the power cord of the PS3 and television (or display) from the wall socket.
Make sure the HDMI cable is connected to the [HDMI OUT] port on the back of the PS3 system.
Connect the other end of the HDMI cable into the [HDMI Input] port of the TV or display monitor.
Plug the PS3 and television (or display) back in to the wall socket.
While the PS3 system is in standby mode (red light on the front of the system), hold down the On/Off button on the front of the system for at least 5 seconds until you hear a second beep. The Video Output Settings will automatically reset to the standard resolution (or detect the current display output settings of your TV/monitor).
Reset the Video Output Settings
If you changed televisions or changed the type of cable you are using, you may need to reset the video output on the PS3. Perform the following steps to reset the Video Output Settings.
Before changing cables, make sure the PS3 is turned off and the power light is red.
Unplug the power cord of the PS3 and television (or display) from the wall socket.
Make sure the HDMI cable is connected to the [HDMI OUT] port on the back of the PS3 system.
Connect the other end of the HDMI cable into the [HDMI Input] port of the TV or display monitor.
Plug the PS3 and television (or display) back in to the wall socket.
While the PS3 system is in standby mode (red light on the front of the system), hold down the On/Off button on the front of the system for at least 5 seconds until you hear a second beep. The Video Output Settings will automatically reset to the standard resolution (or detect the current display output settings of your TV/monitor).
TRENDING THREADS
-
-
News Nintendo obliterates 8,535 Yuzu repos — Nintendo's most effective DMCA takedown campaign in years- Started by Admin
- Replies: 20
-
Question Need some help with a new prebuilt not displaying- Started by Creatir
- Replies: 16
-
News AMD's gaming revenue nosedives 48%, not expected to recover until 2025
- Started by Admin
- Replies: 38
-
News Windows 11 market share declines as users seemingly shift back to Windows 10
- Started by Admin
- Replies: 52
-
Question Win 10 BSOD IRQL_NOT_LESS_OR_EQUAL, Need help plz- Started by neurotic02
- Replies: 7
Facebook
Twitter
Instagram