Not too long ago I bought a HooToo HT-PC002 USB 3.0 PCIe adapter for my computer, and at first it was working fine. However, I recently had significant software problems, and as a solution I wiped the drives and reinstalled everything. Since I've done this, the USB 3.0 on my computer has been acting rather erratic. The ports in the back of the motherboard don't work at all (even though they're detected by the computer), and when I try to use any of the ports connected to the adapter, my computer freezes and I get a BSOD with the error message "KMODE_EXCEPTION_NOT_HANDLED (usbhub.sys)". Nothing has changed on my system other than the fact that I reinstalled everything. All drivers for the motherboard and adapter are installed and up to date. USB 2.0 on the board and any hubs works fine. Any idea what's going on?
Here's my system specs:
AMD FX 8350
ASUS M5A97LE R2.0
16GB DDR3 1866 G-Skill Ares
MSI R9 270X 2GB GDDR5
Sandisk 128GB SSD
Seagate 2TB Barracuda HDD
HooToo HT-PC002 USB 3.0 PCIe Adapter
Raidmax Thunder V2 640W Power Supply
Windows 8.1 Pro 64-Bit
Here's my system specs:
AMD FX 8350
ASUS M5A97LE R2.0
16GB DDR3 1866 G-Skill Ares
MSI R9 270X 2GB GDDR5
Sandisk 128GB SSD
Seagate 2TB Barracuda HDD
HooToo HT-PC002 USB 3.0 PCIe Adapter
Raidmax Thunder V2 640W Power Supply
Windows 8.1 Pro 64-Bit
Facebook
Twitter
Instagram