Sign in with
Sign up | Sign in
Your question
Solved

asus sabertooth 990fx R2.0 With Corsair DDR3 Vengeance Black PC12800 8GB (2X4GB) - CML8GX3M2A1600C9 Low Profil

Last response: in Memory
Share
March 2, 2014 4:44:09 PM

i use collermaster v6GT that's memory fit or stuck on my v6gt ?
asus sabertooth 990fx R2.0 can runing with that's memory ? or must setup again on bios and when yes how ?
one more guys help enermax naxn adv 650w is bad psu ?
i use r9-280x with 8320 FX i have buy that's PSu what i must do when enermax naxn is bad PSU :(  i dont have lot of money again after build this

sorry for my bad english and i need help please
a b Ĉ ASUS
a b } Memory
March 2, 2014 4:52:05 PM

for psu here is a list of psu broken down by tier http://www.eggxpert.com/forums/thread/323050.aspx
it is a tier 2b so not the best but not the worst so i wouldnt worry about that it is tier 3 and below i wouldnt recommend
however if you havent bought it yet i would get a different psu off the tier 1,2 lists
the other part of your question i dont understand could you explain a little more
m
0
l
March 2, 2014 5:00:53 PM

i want to upgrade my memory to Corsair Vengeance DDR3 PC12800 Black 8GB (2x4GB) - CML8GX3M2A1600C9 Low Profile and then when i use it into my motherboard asus sabertooth 990fx R2.0 i gonna got problem ? because i have see when i use that memory i must setting on bios then i have procie cooler master v8gt i'm so scared that's memory heat spread gonna stuck on v6gt fan i'm so sorry my English so bad make you confused sir
m
0
l
Related resources

Best solution

a b Ĉ ASUS
a b } Memory
March 2, 2014 5:05:56 PM

its ok i understand you. that board should recogize those sticks just fine. it native ram speed goes up to 1866 to include 1600, if you were going for a higher speed say 2133 then you would have to overclock the memory controller. but the sticks you have listed have the correct voltage and proper speed to be recognized by that board...and will look quite nice too :) 
Share
a c 786 Ĉ ASUS
a c 1942 } Memory
March 2, 2014 5:06:53 PM

DRAM should work fine, try the sticks in slots 2-4 from the CPU, not a great PSU but should be fine for what you have
m
0
l
March 2, 2014 5:09:34 PM

and about my PSU sir it's gonna be okay on my spec ?
i'm scared that's psu gonna broke my component
m
0
l
a c 786 Ĉ ASUS
a c 1942 } Memory
March 2, 2014 5:17:22 PM

The Enermax has plenty enough power and AMPs to run the rig, for a rig such as yours I normally look for a 550 and 30 AMPs on the 12, your's runs 540 true and has 45 AMPs so should be plenty
m
0
l
March 2, 2014 5:18:25 PM

oh my god thank you for everything you explain to me im really appreciate it ... thank you so much Bad_Kitty13 and for Tradesman1 The moderator, I can breathe easier now thaks TomsHardware
m
0
l
a b Ĉ ASUS
a b } Memory
March 2, 2014 5:18:31 PM

Verheiden said:
and about my PSU sir it's gonna be okay on my spec ?
i'm scared that's psu gonna broke my component


if you havent already bought it let me know what country your from and how much you want to spend and i will try to find you a better one
m
0
l
March 2, 2014 5:19:40 PM

im from indonesian :( 
m
0
l
a b Ĉ ASUS
a b } Memory
March 2, 2014 5:33:17 PM

Verheiden said:
im from indonesian :( 


well that psu will work perfectly fine for your needs but here are some bettter options if you havent already purchased it fom some indonesian stores

http://www.technicapc.com/power-supply/2691-corsair-tx6...

i would probably stick with the one you have and the wattage on the one you have is fine too this is just the lowest watt in the tx series. just nice to have options, if you are getting the enermax for around the same price as this then i would definately go with the tx.
m
0
l
March 2, 2014 5:37:37 PM

Bad_Kitty13 thanks so much im gonna collect my money again for corsair PSU thank you so much Bad_Kitty13 and im sorry for make you busy because of me
m
0
l
a b Ĉ ASUS
a b } Memory
March 2, 2014 5:52:35 PM

Verheiden said:
Bad_Kitty13 thanks so much im gonna collect my money again for corsair PSU thank you so much Bad_Kitty13 and im sorry for make you busy because of me


dont worry about it glad i could help
m
0
l
!