My pc case and my graphics card are 10.24".

CraigN

Distinguished
Your entire case length is the same as the graphics card?

Or just the same size as the available room? It *might* still fit, but it's going to cover a lot of ports and come *very* close to your hard drive bays, so just make sure that the PCIE slots are on the top, not the front of the card.
 

MartinDaBoss

Honorable
Jan 10, 2014
43
0
10,540


The available room in my case is 10.24". Do you know anyone that had this problem? I need a bit more details. If you don't, do you think that I can fix this issue, somehow?
 

MartinDaBoss

Honorable
Jan 10, 2014
43
0
10,540


Doesn't it say that the length from the back of the case to the front of the hdd trey is 12 inches? The room designed for the motherboard and the graphics card has 10.24 inches. I might have just read it wrong... Well, I'll probably measure the case myself.
 

MartinDaBoss

Honorable
Jan 10, 2014
43
0
10,540


So, basically, what you're saying is that it might and might not fit.
 

CraigN

Distinguished
No, I'm saying it should definitely fit. You have 12" of room between the back panels and the drive bay. Not the front of the case. Look at the tape measure in the photograph on that page, it clearly stops at the start of the drive bay.

The card you're looking at is only 10.24". That gives you 1.76" of room between the end of the card and the drive bay. If the PCIE ports are on the front of the card, that might make them a pain to plug in, but it should still definitely fit in that case.

http://www.legitreviews.com/images/reviews/1950/41_Zalman_Z11_room.JPG

 

MartinDaBoss

Honorable
Jan 10, 2014
43
0
10,540


Thanks a bunch, man! You really helped me out. :D