- Feb 27, 2013
- 46
- 0
- 10,530
Can someone help me read my 3d mark 11 score
- Thread starter jaysterbaby
- Start date
oOSlushyOo
Honorable
- Nov 8, 2013
- 256
- 0
- 10,860
That's pretty darn good with running a single 770. For reference, here is what I scored with my old 760 SLI setup: http://www.3dmark.com/3dm11/8015261
You could try a little bit more of an overclock on your 4770k to boost your score a few points higher. As far as what the numbers actually mean...well it's mostly a bragging rights thing. What I typically concentrate on when going about overclocking are the individual GPU and CPU scores. This can give you a relatively tangible measurement of what that extra bit of frequency can produce.
NOTE: I noticed your Maximum Turbo Core Clock is only 800MHz. I would revisit your BIOS to ensure you have the CPU clocked appropriately and that it is not set to factory specs (there might be some power management options that are limiting the CPU a bit).
You could try a little bit more of an overclock on your 4770k to boost your score a few points higher. As far as what the numbers actually mean...well it's mostly a bragging rights thing. What I typically concentrate on when going about overclocking are the individual GPU and CPU scores. This can give you a relatively tangible measurement of what that extra bit of frequency can produce.
NOTE: I noticed your Maximum Turbo Core Clock is only 800MHz. I would revisit your BIOS to ensure you have the CPU clocked appropriately and that it is not set to factory specs (there might be some power management options that are limiting the CPU a bit).
TRENDING THREADS
-
Question Can I use a 6-pin molex to sata power adapter to power a 3.5" hard drive?
- Started by RagingFred
- Replies: 5
-
-
-
Facebook
Twitter
Instagram