Solved

Thermaltake Frio OCK will fit in Thermaltake v3 Amd edition?

My principal concern is about my RAM modules. I have two each one of 4 gb Adata
http://www.hardwarecanucks.com/wp-content/uploads/adata3.jpg

Specific model: DDR3 1600G 4GX16

In the Thermaltake's page, claims that my V3 can support a 160 mm cooling system (the height) THE FRIO OCK is 158 mm

Maybe is irrelevant but here are my other components:

Mobo: Gigabyte 990-FXA-UD3 Rev 4.0
Graphics:Two 7850's of different brand (ASUS & XFX)
Proccesor FX 8320 (withouth OC)
PSU: Corsair Gs 700w

Thanks for your reply
3 answers Last reply Best Answer
More about thermaltake frio ock fit thermaltake amd edition
  1. Best answer
    it will fit in the case, but you may need to move the ram over, as it will likely cover at least one of your ram slots
  2. Brantyn Gerik said:
    it will fit in the case, but you may need to move the ram over, as it will likely cover at least one of your ram slots


    And there is no problem moving the ram ? (i mean related with the dual channel)
    the RAM slot right next to the processor is free right now, (is the 4º slot) the second one is the 2ºslot, next is the 3º and the last is 1º.

    The RAM is located at 1º and 4º slot it looks like this https://www.mediafire.com/?dyx5xpz15dfot57
  3. you will have to consult your motherboard manual for which slots are going to be used for dual channel, sometimes it is the same coloured slots, and sometimes it is opposite. if you don't have the slot closes to the cpu populated, you should still be fine for clearance on the other ones, thus allowing for dual channel
Ask a new question

Read More

RAM ADATA AMD Components Thermaltake