No Display Signal, new build

JimDeezy

Honorable
Dec 28, 2013
58
0
10,640
This is in the build now:
PCPartPicker part list / Price breakdown by merchant / Benchmarks

CPU: AMD FX-8350 4.0GHz 8-Core Processor (Purchased For $0.00)
Motherboard: ASRock 970 EXTREME4 ATX AM3+ Motherboard (Purchased For $0.00)
Memory: G.Skill Value Series 4GB (1 x 4GB) DDR3-1333 Memory (Purchased For $0.00)
Storage: Kingston SSDNow V300 Series 120GB 2.5" Solid State Disk (Purchased For $0.00)
Storage: Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive (Purchased For $0.00)
Video Card: Asus Radeon HD 7770 GHz Edition 1GB Video Card (Purchased For $0.00)
Case: Thermaltake Chaser A31 Snow White ATX Mid Tower Case (Purchased For $0.00)
Power Supply: Corsair Builder 600W 80+ Bronze Certified ATX Power Supply (Purchased For $0.00)
Operating System: Microsoft Windows 7 Home Premium SP1 (OEM) (64-bit) (Purchased For $0.00)
Monitor: Dell ST2321L 23.0" Monitor
Monitor: HP W2072a (A3M50AA#ABA) 60Hz 20.0" Monitor ($0.00)
Keyboard: Rosewill Apollo RK-9100xBBR Wired Gaming Keyboard (Purchased For $0.00)
Mouse: Razer Orochi Bluetooth Wireless Laser Mouse ($0.00)
Other: 4 GB DDR3 (Purchased)
Other: 2 GB DDR3 (Purchased)
Other: Plantronics .Audio 995 Wireless Headset (Purchased)
Total: $0.00
(Prices include shipping, taxes, and discounts when available.)
(Generated by PCPartPicker 2014-03-05 22:38 EST-0500)

Everything is plugged in except the WD 1TB HDD which has windows 7 on it from an old machine,
The 120gb ssd doesn't have an os installed yet

After turning on the new build Dr. Debug shows an 0d error code which I read means no GPU code I think? (Manual says reserved for future error codes)
I think this board needs an update for the FX8350 too...

So there's no display, and no on-board video?

What can I do?

Also the GPU worked before in another machine and its fan is spinning

Thanks for your help
 

JimDeezy

Honorable
Dec 28, 2013
58
0
10,640
Just figured it out, The GPU was indeed not plugged in all the way, derp

A little more force required to get the slot in all the way, and had to make sure that little lock fit over the groove at that point.

Setting it all up now!