How to get a wired connection from a distant router?

bobc31

Reputable
Mar 7, 2014
2
0
4,510
I have the following situation... My wireless router and modem are located in the basement. My office is on the second floor. I work from home occasionally so I use a Cisco soft phone. I have been getting complaints from people I call that my voice breaks up (which can be annoying).

Thinking it was my bandwidth, I upgraded my service and I get pretty decent speed. Still the same issue.

I then tried going directly from the router to my computer and the issue goes away.

I have several options: 1- Move the router to the office. 2- drop a line down to the router from second floor. 3- bridge a router as an access point and then have a wired connection.

Option 1 is not feasible due to where the cable comes in and other logistical problems.

Option 2 is difficult because of the fire stops in the walls as well as insulation.

Option 3 sounds promising but I am not sure if I will get the same results as if I went directly to the router.

Any ideas, recommendations would be appreciated.

 
I would run the wire on the outside of the house if it is a huge problem getting it down a wall.

What you want is called a client-bridge. Many of the so called "range extender" things can run in that mode. This are also use to put wireless on gaming consoles and tv that only have ethernet. They are sold as gaming adapters.

Still what you would have to do it extend it part way with ethenet and hope the signal was better. Putting right next to the PC means the bridge can get the poor signal rather than your PC.

The other option that people tend to use is powerline networks. This makes your electrical cable into a long ethernet cable. They normally have less loss and jitter than wireless but unfortunately there are some houses the just refuse to work in. You can also look at MoCA devices if you happen to have coax tv cable in both rooms.
 

Pooneil

Honorable
Apr 15, 2013
1,222
0
11,960
Since it is for work and need to be good, I would find someone skilled in running cable and have them evaluate the situation for you. It is amazing what an experienced cable installer can do in a situation that you and I would think to be impossible. It is worth the cost of an hour or two of their time to get work related IT stuff done right. Once the wire is up there, attach it to a switch and then to whatever equipment you need to make you phone work. You will never regret that you did it.
 

bobc31

Reputable
Mar 7, 2014
2
0
4,510


Hi Pooneil,
I thought about hiring a contractor to cable the house but believe it or not I can't find who will do this. Is there a type of business I should target (i.e. electrical contractor) ? I tried looking up cabling contractor and I keep getting the big companies (ATT, Verizon, Comcast, etc)

Great suggestion.
 

Pooneil

Honorable
Apr 15, 2013
1,222
0
11,960
I don't know who is available in your area. Living in a major city it was easy for me to find a guy when we moved offices and needed help. But for a simple job, even a home alarm installer could probably do the cable pulling. Terminating the cable is easy if you have a place to buy the connectors and face plates.
 

TRENDING THREADS