Sign in with
Sign up | Sign in
Your question
Solved

NZXT Phantom Front LED Not working.

Tags:
  • NZXT
  • Phantom 530
  • Cases
  • Computers
  • Components
Last response: in Components
Share
March 7, 2014 4:42:39 PM

This is just a small pet peeve, but the front led on my 530 isn't working when the computer is on. If the computer is in sleep mode, the light will turn on, but I really like the look of it when it's always on. When I first got the case, it would always be on. Thanks for the help.

More about : nzxt phantom front led working

March 7, 2014 4:50:18 PM

My only Guess check your connection to your mobo, check mobo settings in bios if avail.
m
0
l
March 7, 2014 4:52:52 PM

go on the mobo manufacturer's website and serch for your model's jumper diagram, it will show you how to correctly plug the panel cables
m
0
l
Related resources
March 17, 2014 8:47:45 AM

Lucas Iemini said:
go on the mobo manufacturer's website and serch for your model's jumper diagram, it will show you how to correctly plug the panel cables


I did and everything seems to be connected the way they say it should be. I just don't get why it would be a connection problem since it was working, and then just suddenly stopped. The motherboard shows no signs of having any problems from what i can tell. Everything is working just fine, except that lite.

m
0
l
March 17, 2014 9:20:38 AM

Did you change anything in the UEFI BIOS?. I do believe some mobo companies allow you to change the status of the light.
m
0
l
March 17, 2014 10:41:30 AM

mystilez said:
Did you change anything in the UEFI BIOS?. I do believe some mobo companies allow you to change the status of the light.


no i didn't i dont even know how to access that xD
m
0
l

Best solution

March 17, 2014 11:05:59 AM

before windows boot press del or w/e key its set to and look for the option for the light. hopefully that will fix it. I have the same phantom as well and i can change it to blinking/off completely / on completely on an msi board.
Share
!