Hmdi, usbs, vga ports not working on motherboard

coreycorey · Mar 7, 2014

Those are not working and when I plug in the hdmi when it is on it goes on standby. Bad motherboard or rewire that shiznit.

Someone Somewhere · Mar 7, 2014

New build?

http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems

coreycorey · Mar 7, 2014

Someone Somewhere :

Yep,

Case: HEC Blitz Black Steel Edition ATX Mid Tower
CPU: Intel Core i5-4670K Haswell 3.4GHz LGA 1150 84W Quad-Core Desktop Processor Intel HD Graphics
PSU: Rosewill Green Series RG630-S12 630W Continuous @40°C,80 PLUS BRONZE Certified, Single 12V Rail, Active PFC
Video card: ASUS GTX760-DC2OC-2GD5 GeForce GTX 760 2GB 256-Bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card
Ram: CORSAIR 8GB 240-Pin DDR3 SDRAM DDR3 1333 Desktop Memory Model C
Motherboard: MSI Z87-G55 LGA 1150 Intel Z87 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Hard Drive: Western Digital WD10EZEX 1TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive

Someone Somewhere · Mar 7, 2014

Yeah, that link has a whole pile of troubleshooting info.

Have you had it working before?

coreycorey · Mar 7, 2014

Someone Somewhere :

No just built it tuesday. Also let's say I took the ram out and it beeped would that mean that the motherboard is good or could it still be fried?

Someone Somewhere · Mar 7, 2014

Follow all the troubleshooting steps in there - for quite a while I'm going to just be repeating it. I'm fairly sure that question is answered if you read it.

coreycorey · Mar 7, 2014

Someone Somewhere :

I have two standoff that came with the motherboard where do I put them?

Someone Somewhere · Mar 7, 2014

READ THE THREAD.

coreycorey · Mar 7, 2014

Someone Somewhere :

What does A, AM, and AFM mean inside a case?

Someone Somewhere · Mar 7, 2014

Don't know. Pics? On where in the case?

coreycorey · Mar 8, 2014

Someone Somewhere :

Under where the motherboard goes. one hole is toward the center but down a little and the other is all the way to the left center down a little bit.

Someone Somewhere · Mar 8, 2014

I'm guessing those are standoff holes. Marking shouldn't matter.

If you follow all the troubleshooting info in that thread I linked, you would probably be a whole pile ahead.

coreycorey · Mar 8, 2014

Someone Somewhere :

I'm fixing bent pins i used that guide before i brought it down to standoffs and bent pins. Believe me when I say I looked at it. I've been stuck on this since tuesday and bit more than I could chew. Sorry I don't mean to complain.

Someone Somewhere · Mar 8, 2014

You never said bent pins. RMA the board - even if you unbend them, they might not work properly again. Some of those pins have quite a bit of current going through the tiny contact area.

coreycorey · Mar 8, 2014

Someone Somewhere :

How long does it take to get a new one?

Someone Somewhere · Mar 8, 2014

Couple of days to couple of weeks. Call/email whoever you bought it from and say it arrived with bent pins.

Search

Hmdi, usbs, vga ports not working on motherboard

coreycorey

Reputable

Someone Somewhere

Someone Somewhere

Titan

coreycorey

Reputable

Someone Somewhere

Titan

coreycorey

Reputable

Someone Somewhere

Titan

coreycorey

Reputable

Someone Somewhere

Titan

coreycorey

Reputable

Someone Somewhere

Titan

coreycorey

Reputable

Someone Somewhere

Titan

coreycorey

Reputable

Someone Somewhere

Titan

coreycorey

Reputable

Someone Somewhere

Titan

TRENDING THREADS

Latest posts

Moderators online

Share this page