Solved

Corsair 350D water cooling.

I am thinking about buying a Corsair 350D and would like a custom water cooling kit.
The kits i am consodering are XSPC Raystorm EX/AX 240.
My question is will the 240mm RAD block the 5.25 drive bays so the Pump/Res wont fit?
8 answers Last reply Best Answer
More about corsair 350d water cooling
  1. then remove them
  2. TheUnknownPC said:
    then remove them



    Removing them would be utterly pointless considering the Pump/Res Combo has to be slotted into 2 5.25 inch drive bays.
    Next time before answering at least have some knowledge onwhat i am talking about otherwise your answers are pointless and uneducated
  3. Best answer
    I have a h100i installed (240mm), and it takes up the top of the two 5.25 inch drive bays so it is unusable.
  4. jimthenagual said:
    I have a h100i installed (240mm), and it takes up the top of the two 5.25 inch drive bays so it is unusable.


    but this Pump/Res combo is quite short, how far into the 5.25 inch bay does your h100i extend?
  5. how about getting a separate pump/reservoir, like a tube reservoir and a pump you can put under. I don't have a 350d so I can't tell, but you might be able to put it next to your motherboard. If not you can put it in the hard drive area and put the hard drives in the optical bays.
  6. Jimbo832 said:
    jimthenagual said:
    I have a h100i installed (240mm), and it takes up the top of the two 5.25 inch drive bays so it is unusable.


    but this Pump/Res combo is quite short, how far into the 5.25 inch bay does your h100i extend?


    I literally just sold the system yesterday so I can't measure for you, but here is a picture to give you an idea of how much room is left. You can see how far out the dvd drive is sticking out for a reference. I looked up the stats and that dvd drive is 8 inches long.

    http://i1150.photobucket.com/albums/o614/Jim_Rogers0101/DSCN1395_zps8cd3ea73.jpg
  7. jimthenagual said:
    I have a h100i installed (240mm), and it takes up the top of the two 5.25 inch drive bays so it is unusable.


    jimthenagual said:
    Jimbo832 said:
    jimthenagual said:
    I have a h100i installed (240mm), and it takes up the top of the two 5.25 inch drive bays so it is unusable.


    but this Pump/Res combo is quite short, how far into the 5.25 inch bay does your h100i extend?


    I literally just sold the system yesterday so I can't measure for you, but here is a picture to give you an idea of how much room is left. You can see how far out the dvd drive is sticking out for a reference. I looked up the stats and that dvd drive is 8 inches long.

    http://i1150.photobucket.com/albums/o614/Jim_Rogers0101/DSCN1395_zps8cd3ea73.jpg


    Thank you very much this helps loads :D
  8. bob hays said:
    how about getting a separate pump/reservoir, like a tube reservoir and a pump you can put under. I don't have a 350d so I can't tell, but you might be able to put it next to your motherboard. If not you can put it in the hard drive area and put the hard drives in the optical bays.


    Yeah i was thinking that but i really want to stick to a kit, the idea of having to buy everything seperatly frightens me...

    http://imgur.com/gallery/Q7BCX

    but i guess where the hardrives go you could put a pump+res there
Ask a new question

Read More

Water Cooling Components Corsair