Replaced Graphics Card, Computer won't boot from new card.

Kimpten

Reputable
Mar 11, 2014
13
0
4,510
I am looking for some suggestions. I have replaced my Nvidia GT 520 Graphics Card with a Nvidia GTX 650. I forgot to uninstall the drivers first. I have since then Uninstalled the drivers for both cards just incase, and reinstalled the GTX 650. I also had to replace the PSU with sadly a Dynex 520W. It looks like the highest 12V though is 18A. When Powering on the Computer if the new card is in the slot and has the power supply running to it. It does two different things. One it beeps slowly at me for about 4-5 beeps then powers down. Or sometimes it just makes long and continuous beeps. I can power up the computer with the PSU not connected to the board using the onboard integrated graphics. The Fan on the graphics card will run. If I plug in the power to the graphics board as the computer is running I can detect it in Device Manager. But I get a Code 12 Error. I do not know how to find the IRQs that pertaining to the card or anything so not sure how to proceed on that. But even if I get the Code 12 fixed so that it reads it properly, would that fix my bootup issues. If not I technically have two seperate problems. Also I have been told possibly Memory bad, I have not checked it or not. But if I put in the Original 520 card I have absolutely no issues. This was a Store bought computer from Best Buy a couple of years ago. I know that was a mistake but I did not believe the issues were going to be this much of a headache. Its an HP Pavilion H8-1114. Also I tried looking in the Bios but the bios on the machine is a slimed down version or something because there is only a handful of things you can even do with it. I have seen way more inclusive bios. If you need anything else let me know I am sure I am missing something important to the diagnosing of this.
 

TRENDING THREADS