Hi,
I am completely new to building PC's and have just put together my first one.
It did not boot when I turned it on so I unplugged all the components leaving only the PSU, the motherboard, the ram and the CPU connected.
I am using the Antec HCG 520m, Maximus VI Gene, i5-4670k and the ram is G Skill Trident X 2x4GB 2400mhz
When I turn it on the start button lights up. When I press it, the Q code display's 00 the numbers then go up to 15 and then 21 and then up to 4something and to 00 quickly then the lights turn off. this takes about 5 seconds and the cpu fan tries to start a couple of times during this.
It then displays nothing and cpu fan does nothing for 5 seconds and then it starts again as if I pressed start.
Any help would be greatly appreciated,
Tom
I am completely new to building PC's and have just put together my first one.
It did not boot when I turned it on so I unplugged all the components leaving only the PSU, the motherboard, the ram and the CPU connected.
I am using the Antec HCG 520m, Maximus VI Gene, i5-4670k and the ram is G Skill Trident X 2x4GB 2400mhz
When I turn it on the start button lights up. When I press it, the Q code display's 00 the numbers then go up to 15 and then 21 and then up to 4something and to 00 quickly then the lights turn off. this takes about 5 seconds and the cpu fan tries to start a couple of times during this.
It then displays nothing and cpu fan does nothing for 5 seconds and then it starts again as if I pressed start.
Any help would be greatly appreciated,
Tom
Facebook
Twitter
Instagram