I have a recently built system with an Asus Gryphon Z87 motherboard and the latest BIOS. I had everything set up and running except for a GPU I was waiting on (Quadro K600). I don't remember seeing the Boot_Device_LED staying on when booting until I after I added the Quadro card. If I let the computer boot right into Windows the LED goes off after post, unless I go into the bios settings and it stays lit. I have checked the cables for the SSD and optical drive; both are detected correctly. Any idea if I should even be concerned about the LED indicator if the system is still booting normally? Will the post show errors associated with the LEDs if fast boot is disabled?
The full specs are listed below:
Intel i5-4670K
Corsair H60 water cooler
Corsair Vengeance (1600 mhz 2 x 4GB)
Asus Gryphon Z87 (1707 Bios)
Quadro K600 GPU
Crucial M500 240GB SSD
Asus CD/DVD-RW
Corsair CX600M PSU
Corsair 350D case
Windows 7 (64-bit) Pro
The full specs are listed below:
Intel i5-4670K
Corsair H60 water cooler
Corsair Vengeance (1600 mhz 2 x 4GB)
Asus Gryphon Z87 (1707 Bios)
Quadro K600 GPU
Crucial M500 240GB SSD
Asus CD/DVD-RW
Corsair CX600M PSU
Corsair 350D case
Windows 7 (64-bit) Pro
Facebook
Twitter
Instagram