Sign in with
Sign up | Sign in
Your question
Solved

Corsair link doesn't recognize my h100i

Tags:
  • Overclocking
  • Corsair
  • Windows 8
  • Power
Last response: in Overclocking
Share
March 13, 2014 9:16:02 AM

I've read this seems to be a problem especially with Windows 8.1 users due to the automatic power saver settings. I followed the instructions from the windows support forum (http://support.microsoft.com/kb/2900614) to change the registry and after a restart it worked! I was able to see the fans and the pump in Corsair link etc etc. After shutting down and restarting, I can't see them again!

Anyone have any ideas?

Below are the components for my PC, I just put them together last night.

http://pcpartpicker.com/user/Jpugsley/saved/3FW3

More about : corsair link recognize h100i

Best solution

a b K Overclocking
March 13, 2014 9:20:32 AM

You checked the registry if the values are still set to zero (0)?
Of ALL the following strings -->
- AllowIdleIrpInD3 = 0
- DeviceSelectiveSuspended = 0
- EnhancedPowerManagementEnabled = 0
- SelectiveSuspendEnabled = 0
Share
March 13, 2014 9:33:41 AM

Ahh see, I only initially changed the value on the EnhancedPowerManagmentEnabled. I didn't want to stray from the directions on the forum. I'll go back in to the registry when I get home from work and try again. I'll let you know if that was the solution!! Thanks for the response!!


UPDATE!!!
Thank you to StubbleyBeard! That seems to have worked.
m
0
l
Related resources
April 12, 2014 8:06:40 PM

StubbleyBeard said:
You checked the registry if the values are still set to zero (0)?
Of ALL the following strings -->
- AllowIdleIrpInD3 = 0
- DeviceSelectiveSuspended = 0
- EnhancedPowerManagementEnabled = 0
- SelectiveSuspendEnabled = 0


Hey! I know this is a little old but I wanted to see if this would fix the problem for me too before I just got messing in my registry.

I have a h100i, and I can get it to show up in Corsair Link, but only if I unplug and replug it back into the mobo, windows makes the sound when a usb gets unplugged and then again when i put it back. So, it recognizes it.

The problem however, is the same as the OP, when I restart, Corsair Link no longer sees the h100i, and the icons don't show any values. So if I change my registry values the same way it will work?

I originally went under properties and turned off some power saving settings, which is what I had to do to even get it to register the h100i on my mobo. Any help is greatly appreciated, thanks!

m
0
l
a b K Overclocking
April 13, 2014 1:09:00 PM

brybell said:
StubbleyBeard said:
You checked the registry if the values are still set to zero (0)?
Of ALL the following strings -->
- AllowIdleIrpInD3 = 0
- DeviceSelectiveSuspended = 0
- EnhancedPowerManagementEnabled = 0
- SelectiveSuspendEnabled = 0


Hey! I know this is a little old but I wanted to see if this would fix the problem for me too before I just got messing in my registry.

I have a h100i, and I can get it to show up in Corsair Link, but only if I unplug and replug it back into the mobo, windows makes the sound when a usb gets unplugged and then again when i put it back. So, it recognizes it.

The problem however, is the same as the OP, when I restart, Corsair Link no longer sees the h100i, and the icons don't show any values. So if I change my registry values the same way it will work?

I originally went under properties and turned off some power saving settings, which is what I had to do to even get it to register the h100i on my mobo. Any help is greatly appreciated, thanks!



Yes, you can try turning the following strings to 0 -->
- AllowIdleIrpInD3 = 0
- DeviceSelectiveSuspended = 0
- EnhancedPowerManagementEnabled = 0
- SelectiveSuspendEnabled = 0

If that does not work out, you can always revert it back by changing the values to 1.
However, its should work when done correctly.
m
0
l
April 14, 2014 1:13:35 PM

StubbleyBeard said:
brybell said:
StubbleyBeard said:
You checked the registry if the values are still set to zero (0)?
Of ALL the following strings -->
- AllowIdleIrpInD3 = 0
- DeviceSelectiveSuspended = 0
- EnhancedPowerManagementEnabled = 0
- SelectiveSuspendEnabled = 0


Hey! I know this is a little old but I wanted to see if this would fix the problem for me too before I just got messing in my registry.

I have a h100i, and I can get it to show up in Corsair Link, but only if I unplug and replug it back into the mobo, windows makes the sound when a usb gets unplugged and then again when i put it back. So, it recognizes it.

The problem however, is the same as the OP, when I restart, Corsair Link no longer sees the h100i, and the icons don't show any values. So if I change my registry values the same way it will work?

I originally went under properties and turned off some power saving settings, which is what I had to do to even get it to register the h100i on my mobo. Any help is greatly appreciated, thanks!



Yes, you can try turning the following strings to 0 -->
- AllowIdleIrpInD3 = 0
- DeviceSelectiveSuspended = 0
- EnhancedPowerManagementEnabled = 0
- SelectiveSuspendEnabled = 0

If that does not work out, you can always revert it back by changing the values to 1.
However, its should work when done correctly.


Thanks so much! I will test this tonight.
m
0
l
April 15, 2014 11:26:26 PM

StubbleyBeard said:
brybell said:
StubbleyBeard said:
You checked the registry if the values are still set to zero (0)?
Of ALL the following strings -->
- AllowIdleIrpInD3 = 0
- DeviceSelectiveSuspended = 0
- EnhancedPowerManagementEnabled = 0
- SelectiveSuspendEnabled = 0


Hey! I know this is a little old but I wanted to see if this would fix the problem for me too before I just got messing in my registry.

I have a h100i, and I can get it to show up in Corsair Link, but only if I unplug and replug it back into the mobo, windows makes the sound when a usb gets unplugged and then again when i put it back. So, it recognizes it.

The problem however, is the same as the OP, when I restart, Corsair Link no longer sees the h100i, and the icons don't show any values. So if I change my registry values the same way it will work?

I originally went under properties and turned off some power saving settings, which is what I had to do to even get it to register the h100i on my mobo. Any help is greatly appreciated, thanks!



Yes, you can try turning the following strings to 0 -->
- AllowIdleIrpInD3 = 0
- DeviceSelectiveSuspended = 0
- EnhancedPowerManagementEnabled = 0
- SelectiveSuspendEnabled = 0

If that does not work out, you can always revert it back by changing the values to 1.
However, its should work when done correctly.


You are awesome, my friend!! Thanks!
m
0
l
!