Sign in with
Sign up | Sign in
Your question
Solved

24inch screen displaying 20inch resolution

Last response: in Graphics & Displays
Share
March 14, 2014 6:31:33 PM

So I bought two S24C300Ls together
both 24 inch
one is running on a HDMI cable
The other is HDMI --> Displayport
And the screen that's running only on HDMI has a massive pixel gap between the actual displayed pixels and the edge of screen and behaving like a 20" screen
The 24" screen on a displayport adaptor is filling the arches

any suggestions?

F.Y.I i had these two screens in a 3 monitor setup for a few days and the centre screen was 20" so that might have been the cause of this.

AMD 6950HD
i5 sandybridge
8gb ram

Best solution

March 14, 2014 7:51:24 PM

yanga said:
So I bought two S24C300Ls together
both 24 inch
one is running on a HDMI cable
The other is HDMI --> Displayport
And the screen that's running only on HDMI has a massive pixel gap between the actual displayed pixels and the edge of screen and behaving like a 20" screen
The 24" screen on a displayport adaptor is filling the arches

any suggestions?

F.Y.I i had these two screens in a 3 monitor setup for a few days and the centre screen was 20" so that might have been the cause of this.

AMD 6950HD
i5 sandybridge
8gb ram


* Make sure all 3 monitors are running at the same resolution
* Check the settings in the Catalyst Control Panel and make sure it doesn't have some type of manual positioning, stretching, or overscan applied to it.
* Check the monitor settings itself to see if it is doing something to the signal.
Share
!