My first liquid cooling build

Umair Shariff

Honorable
Apr 26, 2013
122
0
10,710
Hi guys, I am gonna be doing a major upgrade to my current desktop - liquid cooling

I have read through all the stickies, all the guides and gone through all the videos on liquid cooling and have made a list of components from ekwb.com (its the only online shop that can deliver directly to me) so, I would like your thoughts and recommendations, anything that I should do to reduce cost, or alternate parts, etc

My System Build:

CPU - AMD FX-8350
GPU - Asus R9 290 (stock)
PSU - Corsair CX500
RAM - GSkill 4x4GB
SSD - OCZ Vertez 128
HDD - JBOD 4.5 TB
Cabinet - Silverstone PS05

The help that I need here - Do I need to upgrade my psu?? Recommend a better enclosure, for the new cooling, and will i need to worry about the cooling on the ram??

Liquid Cooling Setup:

CPU Block - EK-Supremacy - Acetal+Nickel (http://www.ekwb.com/shop/ek-supremacy-acetal-nickel.html)
GPU Block - EK-FC R9-290X - Acetal (http://www.ekwb.com/shop/ek-fc-r9-290x-acetal.html)
Pump - EK-DCP 2.2 (12V DC Pump) (http://www.ekwb.com/shop/ek-dcp-2-2-12v-dc-pump.html)
Radiator - EK-CoolStream PE 240 (Dual) (http://www.ekwb.com/shop/ek-coolstream-pe-240-dual.html)
Reservoir - EK-Multioption RES X2 - 100 Basic (http://www.ekwb.com/shop/ek-multioption-res-x2-100-basic.html)
Compression Rings - EK-CSQ Fitting 13/19mm G1/4 - Black (http://www.ekwb.com/shop/ek-csq-fitting-13-19mm-g1-4-black.html)
Tubing - TUBE PrimoChill PrimoFlex™ Advanced LRT™ 19,1 / 12,7 mm - Brilliant UV Blue (PFLEXA-34-B) (http://www.ekwb.com/shop/tube-primochill-primoflextm-advanced-lrttm-11-1-15-9-mm-brilliant-uv-blue-1.html)
Coolant - EK-Ekoolant UV BLUE (premix 1000mL) (http://www.ekwb.com/shop/ek-ekoolant-uv-blue-premix-1000ml.html)


Here, things that i want to know:

Is the pump sufficient??
Is the radiator sufficient?? (I prefer single 120mm)
I am getting compression rings x10, will that suffice??

Any input by you guys will be appreciated, since this is my first setup, i dont want to screw up anything. Also, it would be cool, if anyone can point these/similar parts that can be bought online in India, via a debit card ;)
 
Solution


1st tip get an nzxt starters kit and then plop an extra alfacool radiator in it. The psu needs and upgrade and for the rest i'm not sure
 
Solution


Both psu's are good and you will need an extra radiator ass the r9-290 runs insanly hot and therefor you need more cooling
 


No cheap ones really the best under 100€ case i know that supports 4*120mm rad (2*2*120mm) is the cm 690III
 


The good old Haf 932 :D. Well you can fit an triple rad radiator in it on top and a quad rad is possible but not without modding the case. Heres a modders guide :http://www.overclockers.com/forums/showthread.php?t=676707