Asus P9X79-E WS planar

onthemap

Distinguished
Mar 16, 2014
3
0
18,510
First a little history... I had a P9X79 board but the onboard LAN 82579 has no drivers for Windows Server 2012 and R2 edition. I looked everywhere and found where I can edit the .inf and it did not work. Otherwise, the motherboard worked just great.

Therefore, I upgraded to a P9X79-E WS, but now the problem is that it will not boot. Everything turns on, fans, DVD drives open and close but I have no video.

I used the same CPU (i7 4930K, 64 GB Ram G.Skill DDR3 2400 and NVidia GT 620 Video (1 GB DDR3) card as on the P9X79.

Using the LED lights as an indicator, it tells me the CPU is no good, also, manual indicates that the LED on board
for the video card should turn on, then off after it verifies it is good. It does not turn on at all.

Also, there is a Q-Code LED (gives you 2 digits codes) on the board that indicates (using the codes from the latest manual) what could be wrong, but that does not light up either.

I went as far as connecting a PC speaker to the system panel connector and listen to the beeps that it would emit, none come out.

I think I have a bad board. I also sent off an email to ASUS explaining the same. Waiting.

Has anyone else encountered this issue?
 

onthemap

Distinguished
Mar 16, 2014
3
0
18,510
Thanks but...The driver you speak of works great for Win 8.1 or less. But if you read the small print, 82579 NIC is not supported in Server 2012 ( on the Intel site).
As I mentioned I looked everywhere, I even edited the inf file in the NDIS63 folder and ran bdcedit command before and after.

But this is not the reason why i posted this post. It is because the new P9X79-E WS planar does not boot. I'm using the same hardware as I was on the non E WS planar.