I have been using this CPU for a little while now and want to try overclocking it.
My specs:
AMD Phenom II x6 1045 w/ ARCTIC Freezer 7 Pro Rev 2.
ASUS m4a88T-M
Patriot 8GB DDR3 RAM
I took a stab at changing a few settings in the BIOS with another guide on here.
Here is my CPU Z screenshot: http://puu.sh/7zdti.png
I was able to run a prime95 Small FFT test for 10 minutes with no failure, yet with a Blend test after 3 minutes I was recieving "Worker stopped" for one worker, which then led to more giving out.
Where do I go from here?
My specs:
AMD Phenom II x6 1045 w/ ARCTIC Freezer 7 Pro Rev 2.
ASUS m4a88T-M
Patriot 8GB DDR3 RAM
I took a stab at changing a few settings in the BIOS with another guide on here.
Here is my CPU Z screenshot: http://puu.sh/7zdti.png
I was able to run a prime95 Small FFT test for 10 minutes with no failure, yet with a Blend test after 3 minutes I was recieving "Worker stopped" for one worker, which then led to more giving out.
Where do I go from here?