Can't boot with new Vengeance ram

After install the new ram I've got the bluescreen on booting. It shows "a required device isn't connect". I had this ram for a year without any problems but recently it randomly freeze so I thought that it's a ram fault so I claimed a new one. after I installed this one I couldn't even boot then I claimed a new one again and now I still can't boot with it.
i3 530
Gigabyte p55-ud3l
Ram Corsair vengeance 8GB 1600mhz

Ps. I still can boot with my old Kingston 4gb 1333mhz and can overclock to 1700mhz without problem.
4 answers Last reply
More about boot vengeance ram
  1. Try to put RAM sticks in different slots and make sure they seat properly in slots
  2. It still doesn't work and I already try put only one of them but it's still not working
    thank you for your suggestion
  3. I think your board doesn't support 1600mhz ram....
    http://www.gigabyte.com/products/product-page.aspx?pid=3501#sp

    "Memory
    4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
    Dual channel memory architecture
    Support for DDR3 2200/1333/1066/800 MHz memory modules"

    Yet it supports 2200 speed ram >_> I dunno what to tell you, other than get faster or slower speed ram.
  4. James Mason said:
    I think your board doesn't support 1600mhz ram....
    http://www.gigabyte.com/products/product-page.aspx?pid=3501#sp

    "Memory
    4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
    Dual channel memory architecture
    Support for DDR3 2200/1333/1066/800 MHz memory modules"

    Yet it supports 2200 speed ram >_> I dunno what to tell you, other than get faster or slower speed ram.

    I tried underclocking it to 1333mhz but it doesn't work
    Actually I used to have them working before but I don't know why. Maybe main board is faulty?
    Sorry for slow replying:)
Ask a new question

Read More

RAM Boot Memory