3-pin molex to what?

Toggle sidebar Toggle sidebar
ComputerKid1234

ComputerKid1234

Honorable
Oct 26, 2013
53
0
10,630
gOml3q3.jpg

8bHNxwI.jpg

20dV76b.jpg


Here are some pictures of the cables other end.

So the problem is that I don't know what it is called, the plugging of the pictures.
Any help? I would also appreciate if somebody could link me a trustful website where I can buy cable like that.
Other end is 3-pin molex and other end is that what ever it is.

Thank you!

Fixed images - Someone Somewhere
 
Solution
Someone Somewhere
OK, not a standard JST. Metric ones are a bit harder to come by.

While I can almost certainly find someone selling the wire, it isn't necessarily going to be wired right for what you want.

I'd repair the existing one; grab a soldering iron and re-attach it. That or call up NZXT and get a replacement under warranty.
Sort by date Sort by votes
ComputerKid1234

ComputerKid1234

Honorable
Oct 26, 2013
53
0
10,630


Ummm.. I have been using it as in the fan controller which came with the case I bought (NZXT H2, silent)
I mean.. I haven't touched the whole damn fan control system till today and I was surprised what was that plugging.
 
Upvote 0 Downvote
ComputerKid1234

ComputerKid1234

Honorable
Oct 26, 2013
53
0
10,630


I checked that it's 2mm
 
Upvote 0 Downvote
Someone Somewhere

Someone Somewhere

Titan
Sep 23, 2012
22,291
8
84,965
OK, not a standard JST. Metric ones are a bit harder to come by.

While I can almost certainly find someone selling the wire, it isn't necessarily going to be wired right for what you want.

I'd repair the existing one; grab a soldering iron and re-attach it. That or call up NZXT and get a replacement under warranty.
 
Upvote 0 Downvote
Solution
ComputerKid1234

ComputerKid1234

Honorable
Oct 26, 2013
53
0
10,630


I'am worried I might not get it replaced because of all the soldering I've already done for it.. There was some problems with the other part of the fan controller, the other wires which go for the fans. They were melted so I had to solder them back together and used electronic tape.. And I have also changed the fans..
ANYWAY!
I wish I could buy a new one of those cables with the (as u say) a JST end and 3-pin molex on the other end, to replace the broken one :)

(Yes this is wierd answer) feel free to ask something if you didn't understand!
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom