how can i reinstall my wireless link to router?
- Thread starter army mom
- Start date
Solution
Nathan Willis
Reputable
- Mar 15, 2014
- 1,152
- 0
- 5,960
Go to your manufacturer's website and download your wireless driver.
Make sure the driver is for your system. (Right Model ETC)
After you install it you should have wirelesses again.
Happy Computing!
Make sure the driver is for your system. (Right Model ETC)
After you install it you should have wirelesses again.
Happy Computing!
silhouttejames
Honorable
- Oct 26, 2012
- 73
- 1
- 10,660
Make certain the ISP had already provided DSL Broadband Service (PPPoE) to you.
Please connect the router to the computer which used to connect directly to your modem.
Only use the Ethernet port on the modem. If you were using the USB connection before using the router, disconnect the USB cable and connect an Ethernet cable to the WAN port of the router.
Make certain that you had disabled or uninstalled other third part PPPoE dialing up software such as WinPoet, Broadjump, or Enternet 300 from your computer, otherwise you will not be able to connect to the Internet. Some ISPs also provide similar PPPoE dialing up software.
http://www.tp-link.us/article/?faqid=86
Please connect the router to the computer which used to connect directly to your modem.
Only use the Ethernet port on the modem. If you were using the USB connection before using the router, disconnect the USB cable and connect an Ethernet cable to the WAN port of the router.
Make certain that you had disabled or uninstalled other third part PPPoE dialing up software such as WinPoet, Broadjump, or Enternet 300 from your computer, otherwise you will not be able to connect to the Internet. Some ISPs also provide similar PPPoE dialing up software.
http://www.tp-link.us/article/?faqid=86
Facebook
Twitter
Instagram