Changing between a wireless network and an ethernet network
- Thread starter WESC79
- Start date
It is simplest to manipulate the routes with the ROUTE command. You can only have 1 default route so you would just put in ROUTE DELETE and ROUTE ADD commands to choose.
Now if only one of these networks has internet you can actually have both active at the same time. You would just put the default route on one and then put in the routes to the other network with route add commands. You can actually use 2 internet connection if you are work hard enough using this method also.
Now if only one of these networks has internet you can actually have both active at the same time. You would just put the default route on one and then put in the routes to the other network with route add commands. You can actually use 2 internet connection if you are work hard enough using this method also.
mbreslin1954
Distinguished
- Nov 27, 2010
- 1,515
- 1
- 20,460
This might help a little:
http://superuser.com/questions/121998/windows-7-how-can-i-add-an-ip-range-in-the-route-command
http://www.mydigitallife.info/how-to-add-route-to-tcpip-routing-table-with-windows-routing-and-remote-access-console-or-dos-prompt/
http://superuser.com/questions/121998/windows-7-how-can-i-add-an-ip-range-in-the-route-command
http://www.mydigitallife.info/how-to-add-route-to-tcpip-routing-table-with-windows-routing-and-remote-access-console-or-dos-prompt/
ubercake is one option.
Another option is a little bit more complicated but you won't have to turn on/off any of the adapter in future. If you connect the wired network to your wireless router. Unless you want to keep the guest wireless off your LAN.
Another option is a little bit more complicated but you won't have to turn on/off any of the adapter in future. If you connect the wired network to your wireless router. Unless you want to keep the guest wireless off your LAN.
TRENDING THREADS
-
-
RTX 4070 vs RX 7900 GRE faceoff: Which mainstream graphics card is better?- Started by Admin
- Replies: 56
-
Question PC (laptop) Is performing way below potential for a long time
- Started by yololife55
- Replies: 4
-
-
Question Would 32 gigs of ram really make a difference in a xeon e3 1240 v2 and gtx 970 build?- Started by jordanbuilds1
- Replies: 4
-
Question New pc build r9 7900x3d rtx 4080 super no post only ram rgb turns on- Started by Harvey Durward
- Replies: 2
-
Question Bought a new m.2 SSD. Will be added to my build for music programs. Do i need to delete and reinstall these programs?
- Started by rashadd26
- Replies: 10
Facebook
Twitter
Instagram