i have to do this?
.......
Clear the CMOS. (Section 1.2.7 of manual)
Put two Kingston modules in either the blue or black slots.
Restart the PC and enter the BIOS setup.
Load optimized defaults from BIOS Exit menu (Section 3.9)
Enter any custom settings you have, if any.
Change Ai Overclock Tuner from [Auto] to [Manual] (Section 3.4.1)
The Kingston memory requires 1.65v DRAM voltage, not 1.5v. (Section 3.4.16)
Change DRAM Voltage from [Auto] to [1.65v].
Change Memory Frequency from [Auto] to [DDR3-1600MHz] (Section 3.4.5)
Adjust first four settings in DRAM Timing Control (Section 3.4.11)
Starting with CAS Latency, set to 9-9-9-27
Save and Exit BIOS.
See how that runs and then add the other two RAM modules.
.......
?