- Mar 22, 2014
- 3
- 0
- 4,510
Hi forum, here's my situation.
Making my first attempt to build a quality gaming pc from scratch. Here are the parts I have so far:
MB - Asus Maximus VI Impact
CPU - intel i5 4570
RAM - 2x 4 gb DDR 3 g.skill sniper (1600 I think)
Case - Lian Li Tu-200
PSU - Silverstone 650w ST65F-G
Installation so far is going smoothly. I still need a HDD and a GPU and monitor, but I wanted to test things out. So, I hooked it up to the TV via the hdmi on the mobo. I also used a simple keyboard as an interface. (A basic USB Dynex keyboard.)
After booting a little, a screen came up saying: Press F1 to run setup. < I pressed F1
Another screen that said: Current BIOS settings do not fully support the boot device. Press F1 to enter BIOS.
Then below it reads: Go to, Advanced > Boot > CSM Parameters to adjust boot parameters.
I pressed F1.
Nothing. The ROG logo appears in the top left corner of the screen, and nothing else, for like 10 minutes. I tried esc, and it says, "do you want to quit without saving?" F1 rings another menu, but I can't navigate it, and it's like each window layers on top of the previous ones without ever going away.
Lastly, I looked at the q-code, and it says A2. That's about all I can think of.
I'd appreciate any help. Thank you very much.
Making my first attempt to build a quality gaming pc from scratch. Here are the parts I have so far:
MB - Asus Maximus VI Impact
CPU - intel i5 4570
RAM - 2x 4 gb DDR 3 g.skill sniper (1600 I think)
Case - Lian Li Tu-200
PSU - Silverstone 650w ST65F-G
Installation so far is going smoothly. I still need a HDD and a GPU and monitor, but I wanted to test things out. So, I hooked it up to the TV via the hdmi on the mobo. I also used a simple keyboard as an interface. (A basic USB Dynex keyboard.)
After booting a little, a screen came up saying: Press F1 to run setup. < I pressed F1
Another screen that said: Current BIOS settings do not fully support the boot device. Press F1 to enter BIOS.
Then below it reads: Go to, Advanced > Boot > CSM Parameters to adjust boot parameters.
I pressed F1.
Nothing. The ROG logo appears in the top left corner of the screen, and nothing else, for like 10 minutes. I tried esc, and it says, "do you want to quit without saving?" F1 rings another menu, but I can't navigate it, and it's like each window layers on top of the previous ones without ever going away.
Lastly, I looked at the q-code, and it says A2. That's about all I can think of.
I'd appreciate any help. Thank you very much.
Facebook
Twitter
Instagram