Hi about 2 hours ago i got a PAGE_FAULT_IN_NONPAGE_AREA BSOD error and from my research it's a memory problem, so i researched some more and someone in a thread on this site said use memtest86+ so i use it and it gives me no errors. My problem is i think memtest only tested one of the ram sticks and not the other one. Does memtest test both at the same time and i just didn't see it test the second or do i have to select the second ram stick. Now back to the Page fault error can it be cause by a program on my computer using to much of the ram at one time because i was running a malwarebytes quick scan and i was using internet explorer at the same time when i decided to check how much of the scan was done when i got a BSOD. From what i read while researching there is a error report done and i was wondering if some knows how to read it.
So to recap: Need to see if the memtest86+ automaticly does both ram sticks at the same time, Using to much of the ram's power could have cause the page fault error and if some could read the error report and tell me what caused the error in the first place.
So to recap: Need to see if the memtest86+ automaticly does both ram sticks at the same time, Using to much of the ram's power could have cause the page fault error and if some could read the error report and tell me what caused the error in the first place.