I have a coolermaster elite 130. I would like to put my R9 290 into the rig permanently, Currently, the GPU fits and runs, but the intense heat it puts out causes the mobo to overheat due to the poor airflow inherent with ITX enclosures. My current CPU uses a h60 with noctua fan for cooling. I'm happy to move into custom water loops, but first i need a system that fits the following criteria:
1. Radiator size is limited to 120mm.
2. there must be sufficient space for a pump & reservoir.
3. The loop must be sufficient to keep the CPU (will be an i5 4670) and GPU (R9 290) at safe temps at load.
4.Must be as affordable as possible.
5. Must be available in the UK
Consider this a challenge to all the custom water cooling ninjas out there.I look forward to your responses.
1. Radiator size is limited to 120mm.
2. there must be sufficient space for a pump & reservoir.
3. The loop must be sufficient to keep the CPU (will be an i5 4670) and GPU (R9 290) at safe temps at load.
4.Must be as affordable as possible.
5. Must be available in the UK
Consider this a challenge to all the custom water cooling ninjas out there.I look forward to your responses.