Ram stuck on 1333mhz

vampyiere6 · Mar 23, 2014

Hello!

So as the title says my ram is stuck on 1333mhz it is 1600mhz ram and my motherboard should support up to 1866mhz without overclocking so do i still manualy need to add all voltages and dram timings to get ti to run at 1600mhz?

And if so what all values do i need to change?

My mobo is asus m5a99x evo
and ram is http://www.kingston.com/datasheets/KHX1600C9D3_4G.pdf

SethJPC · Mar 23, 2014

Go into the motherboard bios and find the xmp profile and set the ram to 1866Mhz

vampyiere6 · Mar 23, 2014

SethJPC :

isent xmp only for intel motherboards? and for amd you need to set them manually?

Tradesman1 · Mar 23, 2014

Some AMDs use the actual XMP, many others, like I believe yours, utilizes DOCP or EOCP, see if either is in the advanced section of the BIOS, enable it and select 1866, not all CPUs can run 1866 (normally the upper tier FXs can) so may need to drop to 1600, any problems let us know CPU and model # of DRAM

vampyiere6 · Mar 23, 2014

Tradesman1 :

My ram is 1600mhz not 1866mhz but my motherboard does support ram up to 1866mhz without overclocking
and this is the model of my ram KHX1600C9D3/4GX

And as i said my mobo is asus m5a99x evo you find all my specs in my sig

Tradesman1 · Mar 23, 2014

I'd try the DOCP/EOCP/XMP if there, if not manually will want freq to 1600, base timings to 9-9-9-27, DRAM voltage 1.65, and prob CPU/NB voltage at 1.2

vampyiere6 · Mar 24, 2014

Tradesman1 :

Thanks i found the docp options and did enable it, and it did put my ram to 1600mhz as i wanted but i did notice its now the latenzy as 9-9-9-24 shouldent it be 27 for my ram?

And the voltage was still at 1.5v in the bios before i did restar so idk if it did change it.

i did just run 1 round of titanfall and i had no crashes so it should be stable, should i still change the 24 to 27 and the voltage to 1.65? or was it just showing that cos it was on idle and it will use the higher when the ram is being used?

vampyiere6 · Mar 24, 2014

Tradesman1 :

i did play 1 run of bf4 and it went fine but when the match ended and i pressed quit i got bsod i went into the bios again and the voltage was changed to 1.65 and then i did manualy change the 24 to 27.

and then after the bsod and i went to bios and restarted the computer did peform some sort of hard drive check on the c drive not sure what that was.

even with the timing at 9-9-9-27 and 1.65v titanfall just crashed so it still looks like its not stable i havent checked the cpu/nb voltage as you suggested so should i put the CPU/NB voltage to 1.2?

Tradesman1 · Mar 24, 2014

Yes, sounds like it's getting there, the CPU/NB is the MC 9memory controller) voltage, should help stabilize

Search

Ram stuck on 1333mhz

vampyiere6

Honorable

Tradesman1

SethJPC

Distinguished

vampyiere6

Honorable

Tradesman1

Legenda in Aeternum

vampyiere6

Honorable

Tradesman1

Legenda in Aeternum

vampyiere6

Honorable

vampyiere6

Honorable

Tradesman1

Legenda in Aeternum

TRENDING THREADS

Latest posts

Moderators online

Share this page