I just put my new PC together - the components are listed below.
On initial boot up it shows double 00 in the error code LED which the manual says is unassigned.
The machine starts booting I can see the LEDs come on all over the board the memory LEDs light up it looks copacetic. However the machine shuts down in a second or two. Then self starts again displaying 00 in the error Code LED and then shuts down again and will repeat this cycle until I kill the power.
Any ideas? I'm stumped.
ASUS X79 DELUXE LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Intel Core i7-4930K Ivy Bridge-E 3.4GHz LGA 2011 130W 6-Core Desktop Processor BX80633i74930K
WD BLACK SERIES WD1003FZEX 1TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive
CORSAIR Dominator Platinum 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 2400 Desktop Memory Model CMD16GX3M4A2400C11
ASUS EAH6450 Silent/DI/1GD3(LP) Radeon HD 6450 1GB 64-bit DDR3 PCI Express 2.1 x16 HDCP Ready Low Profile Ready Video Card
Cooler Master Seidon 120XL
On initial boot up it shows double 00 in the error code LED which the manual says is unassigned.
The machine starts booting I can see the LEDs come on all over the board the memory LEDs light up it looks copacetic. However the machine shuts down in a second or two. Then self starts again displaying 00 in the error Code LED and then shuts down again and will repeat this cycle until I kill the power.
Any ideas? I'm stumped.
ASUS X79 DELUXE LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Intel Core i7-4930K Ivy Bridge-E 3.4GHz LGA 2011 130W 6-Core Desktop Processor BX80633i74930K
WD BLACK SERIES WD1003FZEX 1TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive
CORSAIR Dominator Platinum 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 2400 Desktop Memory Model CMD16GX3M4A2400C11
ASUS EAH6450 Silent/DI/1GD3(LP) Radeon HD 6450 1GB 64-bit DDR3 PCI Express 2.1 x16 HDCP Ready Low Profile Ready Video Card
Cooler Master Seidon 120XL