Sign in with
Sign up | Sign in
Your question

23 gets no signal but crt has display

Tags:
  • CRT Monitors
  • Graphics
  • Displays
Last response: in Graphics & Displays
Share
March 26, 2014 6:50:19 AM

I have an i7 pc with 8 gigs tam but due to studies i installed windows xp months ago,

If i use my old CRT monitor then everything is displayed, if i plug in the 23inch monitor then i get a no signal screen, if i auto adjust same thing, but the 1st time i booted the pc up with it, it seems as if it was searching for the proper resolution, because i saw some display but was like half of the screen blurry with like red lines across and from there it went back to no signal.

i have checked 2 different powersupplies a 600wat and 500wat, my processor is fine and the cables is properly connected. i then changed the resolution on my crt monitor to the highest which then went out of frequency, i pluged the 23inch in asap and still no display.

My grafics card is not powerful but it runs most games in high res.
both inputs is DVI so i use a converter.

i reseted my board, same issue, keep in mind that once i switch on the pc still shows no display, but the 1st time i plugged it in the screen went black with nothing on almost like its recieving a signal but that all he sang,when windows loaded the screen went back 2 no signal.

Any advise.

Regards

More about : signal crt display

March 26, 2014 7:11:19 AM

Can you state the the graphic card you are using? And have you tried the monitor with something else, like can you try it in your neighbors house or can you use a different adapter.
m
0
l
!