Here is the mother board I am using ntel DG965WH I wanted to upgrade my memory and expand to 8 GB. I had 2 x 1 GB before but I was worried about the compatibility between two different kinds I went out and bought 4 x 2 GB of Patriot 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 667 (PC2 5300)
After installing the first pair, the system booted up and ran smoothly. I shut down put in the other pair, and it wouldn't boot. It started and everything was coming up but there was nothing on the monitor. I even tried to leave one in and run 3 x 2GB but it did the same as the 4 x 2 GB. Here is some info from the motherboard manufacturer.
Maybe I am doing something wrong but I feel like the memory I am using fits all the criteria. Is there something I am missing?
EDIT: I am running win 8.1 64 bit
After installing the first pair, the system booted up and ran smoothly. I shut down put in the other pair, and it wouldn't boot. It started and everything was coming up but there was nothing on the monitor. I even tried to leave one in and run 3 x 2GB but it did the same as the 4 x 2 GB. Here is some info from the motherboard manufacturer.
Supported DIMM configurations
The following table lists the supported DIMM configurations.
DIMM Type - DDR2 667
SDRAM - 1 Gbit
Smallest usable - 512 MB
DIMM (one x16 Single-sided DIMM) - 2 GB
Largest usable DIMM (one x8 Double-sided DIMM) Maximum capacity with four identical x8 Double-sided DIMMs - 8 GB
Maybe I am doing something wrong but I feel like the memory I am using fits all the criteria. Is there something I am missing?
EDIT: I am running win 8.1 64 bit