Sign in with
Sign up | Sign in
Your question

i need help if this ram compatible with this mb's

Last response: in Memory
Share
March 30, 2014 3:26:39 AM

i just check this ram in g skill website http://www.gskill.com/en/product/f3-14900cl9d-8gbxl
and found out that gigabyte ga 970 ds3p, asrock 970 extreme r2.0 and m5a97 le r2.o is not on the QVL list so may i ask if u guys who have this ram and this boards that i post is currently working fine and there's no need to change on the bios just plug and play :( 

thanks

More about : ram compatible

March 30, 2014 3:28:54 AM

should be fine on any of those motherboards
m
0
l
March 30, 2014 3:37:16 AM

logang said:
should be fine on any of those motherboards



so it will boot up to the os with no problem and i can see the default speed which is 1866mhz ? :??: 

m
0
l
Related resources
March 30, 2014 3:38:18 AM

Depending on the board it may not natively run at 1866, you may have to go into the bios and set it to the XMP profile. It may show up as 1333, but it should run fine.
m
0
l
March 30, 2014 3:56:49 AM

logang said:
Depending on the board it may not natively run at 1866, you may have to go into the bios and set it to the XMP profile. It may show up as 1333, but it should run fine.


is it hard to do that ??:( 

m
0
l
March 30, 2014 4:02:36 AM

No there are lots of online guides. What menus and selections you have will changed based on your motherboards bios menus and such but generally the settings are very similar.
m
0
l
a c 2185 } Memory
March 30, 2014 7:22:21 AM

With new DRAM a mobo will boot up to it's default, which normally is 1066 or 1333 w/ AMD, you can then either set the DRAM up manually or or (easier) see if the mobo supports DRAM ocing profiles, AMD using a number of methods, most common are DOCP, EOCP and XMP, find that, enable it and select the freq of your DRAM
m
0
l
March 31, 2014 5:33:19 AM

Tradesman1 said:
With new DRAM a mobo will boot up to it's default, which normally is 1066 or 1333 w/ AMD, you can then either set the DRAM up manually or or (easier) see if the mobo supports DRAM ocing profiles, AMD using a number of methods, most common are DOCP, EOCP and XMP, find that, enable it and select the freq of your DRAM


can u give me the site how to configure that because im kinda new to this specially ocing :pt1cable: 
and asrock extreme 970 3 r2.0 support 1866mhz

m
0
l
!