Best way to run waterloop for amd build

Toggle sidebar Toggle sidebar
zachparr2442

zachparr2442

Honorable
Dec 28, 2013
827
0
11,060
ok so i already have a Swiftech MCP655 and im buying another 360mm or a 420mm, i also have a 240mm rad and a 120mm. so this is the way im looking at running this loop. pump, 360mm, cpu, 120mm, gpu, 240mm, res. OR pump 360mm, cpu, 240mm, gpu, 120mm, res. which on would be the best run.
 
Solution
M
Pump, 240mm, 120mm, cpu, 360mm, gpu, res.

This allows for an equal amount of cooling before the cpu and the gpu. It's likely that a single gpu will use 250-300w, and than an overclocked 8 series will use up to 220w.

This would provide the best cooling to keep both components at around the same temps. You could swap the 360mm with the 120+240 for however it would best fit in your case
Sort by date Sort by votes
M

MFBLO96

Honorable
Dec 12, 2013
398
0
10,960
Pump, 240mm, 120mm, cpu, 360mm, gpu, res.

This allows for an equal amount of cooling before the cpu and the gpu. It's likely that a single gpu will use 250-300w, and than an overclocked 8 series will use up to 220w.

This would provide the best cooling to keep both components at around the same temps. You could swap the 360mm with the 120+240 for however it would best fit in your case
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom