Hey guys I'm in the process of building my own comp I got all the parts yesterday and got it all together to end up with no power at all when I hit the switch. The build is a 4670k Msi gtx 760,Msi z87 g45, with a seasonic 750 w mk ii and a rosewill Blackhawk. As I said I got everything hooked up and no power no standby lights, nothing at all. What do you guys think could be wrong? In my mind it's the psu mobo or switch on the case, any suggestions?
No power anywhere
- Thread starter jordansb8
- Start date
DarkSable
Judicious
- Sep 27, 2012
- 8,890
- 1
- 34,965
Didja check the little switch on the back of the power supply that controls if it'll let the computer turn on or not? I always have that thing in the wrong position.
Also make sure that the PSU power cable is plugged in all the way, that the power button is in the right spot (triple check this, it's easy to get wrong), and that the 24-pin ATX power on the motherboard is plugged in until it clicked.
Also make sure that the PSU power cable is plugged in all the way, that the power button is in the right spot (triple check this, it's easy to get wrong), and that the 24-pin ATX power on the motherboard is plugged in until it clicked.
TRENDING THREADS
-
Question Is in Intel i3-2100 upgradable to an Intel i5-6600
- Started by thesummers04
- Replies: 18
-
News Firefox user loses 7,470 opened tabs saved over two years after they can’t restore browsing session- Started by Admin
- Replies: 40
-
-
-
-
RTX 4060 Ti vs RX 7700 XT faceoff: Which midrange graphics card is superior?
- Started by Admin
- Replies: 32
Facebook
Twitter
Instagram