Installing motherboard problem

Toggle sidebar Toggle sidebar
Status
Not open for further replies.
Ahmadovich

Ahmadovich

Honorable
Jan 21, 2014
103
0
10,680
hey,guys

JnVBsLm.jpg


I need to know which type of screws should be used with those holes on the Mobo to install it to the tray ?
I used #6-32*6 screws which were included with the case
and they are also used to install PSU to the case

Gxs7VDw.jpg


but I don't know if this is the right type of screws or not , and I'm worried because I heard that installng wrong type of screws may cause short circuits,

I need also to know... should I use cardboard washers or not ?

Thank you.
 
Sort by date Sort by votes
expl0itfinder

expl0itfinder

Honorable
May 20, 2013
2,219
1
12,460
Those are the correct screws. There is no risk of short circuit, as long as you use standoffs between the motherboard and the case. As for cardboard washers, you really shouldn't need them. I've done plenty of builds without using any kind of washers, and they have all worked without issue. Just make sure the standoffs are properly install first, and everything will work fine.
 
Upvote 0 Downvote
Ahmadovich

Ahmadovich

Honorable
Jan 21, 2014
103
0
10,680

well ... the case manual says that I should install motherboard with M3*5 screws but they don't fit in the standoffs that came with case
 
Upvote 0 Downvote
Status
Not open for further replies.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom