Sign in with
Sign up | Sign in
Your question

problem regarding low audio output from asrock motherboard (z87 extreme 4)

Tags:
  • Speakers
  • ASrock
  • Motherboards
  • Internet Explorer
  • Audio
Last response: in Motherboards
Share
March 31, 2014 7:27:17 AM

Hello sir.

My problem is regarding the very low audio output from onboard asrock-z87 extreme 4
There is also no problem with my headphone. it work on other PCs very good
I have already maximized all the options regarding the volume but nothing worked for me
also all the sockets of my motherboard ie green black orange blue and pink have there default
settings
for eg for green socket -front speaker output
black socket- side speaker output etc
i also cannot change these settings.
and i only have three options to choose for speaker configuration ie 1.stero 2.Quadraphonic
3. (5.1 channel) and last 4. (7.1 channel)
I don't see any option for (head phone)

please tell me the solution for this ....

More about : problem low audio output asrock motherboard z87 extreme

March 31, 2014 10:09:10 AM

Hi there select option 1. in your configuration plug the headphones in the green slot for stereo sound, this should then increase the volume automatically
m
0
l
April 1, 2014 2:29:45 AM


yes the first time pluged my headphone in green slot only but the problem is same...
m
0
l
Related resources
April 1, 2014 5:33:00 AM

Have you tried any other sound devices? if so then it may be a port or hardware issue...
m
0
l
April 2, 2014 1:32:09 AM

Hjgrove said:
Have you tried any other sound devices? if so then it may be a port or hardware issue...


yes I hav tried another sound devices. but there is no change..
m
0
l
April 3, 2014 8:26:44 AM

Hi there, has it worked yet?
m
0
l
April 3, 2014 1:30:42 PM

Hjgrove said:
Hi there, has it worked yet?


no it has not worked.....
m
0
l
April 4, 2014 8:53:51 AM

try and turn up the voume on a specific port.
Go to
"control panel"
Then "Hardware and sound"
Then click "sound"
Right click on your device (make sure you select the adapter) and click "properties"
Then go to "levels"
You can change the master levels and the specific port volume here like shown in this picture:
http://www.mediafire.com/view/p72libs3armh1gy/example17...
Make sure that they are both on high.
m
0
l
!