Kingston memory compatibility Asus P5Q3

Toggle sidebar Toggle sidebar
M

mircea_eu

Reputable
Mar 31, 2014
3
0
4,510
I wanted to upgrade my PC with KHX16C9B1R/4 but the BIOS wouldn't boot.
I have a motherboard Asus P5Q3 with BIOS version at 1102(the latest) with the QVL

I could not found a 4gb RAM available in my city which is also on the QVL.

I tried manual BIOS settings, like manual seting the frequency and voltage and it didn't work.

The new RAM is fully functional(tested on another motherboard).

Is there any solution to make this memory work on this motherboard?

Regards,
Mircea
 
Solution
Tradesman1
Need the FSB at 1600 to run the sticks at that, which will OC your CPU, this will also entail upping the NB and CPU voltage and may well take additional DRAM voltage, and you don't have a lot of room to play with as these are already 1.65 sticks
Sort by date Sort by votes
Tradesman1

Tradesman1

Legenda in Aeternum
Jun 5, 2013
67,883
40
126,960
Need the FSB at 1600 to run the sticks at that, which will OC your CPU, this will also entail upping the NB and CPU voltage and may well take additional DRAM voltage, and you don't have a lot of room to play with as these are already 1.65 sticks
 
Upvote 1 Downvote
Solution
M

mircea_eu

Reputable
Mar 31, 2014
3
0
4,510
Thank you tradesman1 for your answer.

I saw that the KHX16C9B1R/4 can work also at 1.5V at 1333.
(This module has been tested to run at DDR3-1600 at a low latency timing of 9-9-9 at 1.65V. The SPD is programmed to JEDEC standard latency DR3-1333 timing of 9-9-9 at 1.5V.)
I wanted those settings to also run with the KVR1333D3N9K2/4.

When I tested the KHX16C9B1R/4, I tested it with and without the KVR1333D3N9K2, and on every slot memory on P5Q3.

The P5Q3 have only even voltage settings, so I will try at 1.64 and 1.66. But I think this voltages will fry the KVR1333D3N9K2
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom